Jump to content
SAU Community

Recommended Posts

hey guys, just thought ild post up about my rebuild.. 94 r33 rb25

my old engine was running 270-280hp atw and although it would still get down and boogie, i decided i wanted to get mid-low 300hp mark but then i got a little carried away. i wanted to keep the rb25 in there too once the engine was out and machined ect ect then we threw in

aries87m forged pistons n rings

eagle forged rods

arp head and main studs

tomei poncams

tomei 1.5mm head gasket

acl racing bearings (main and big end)

full nissan gasket kit

os giken twin plate clutch

turbo side

custom hi mount s/s manifold

garret gt35r turbo with braided lines

turbosmart ultragate wastegate

new s/s intercooler piping

a/m 80mm throttle body and cable

greddy plenum

hks ssq bov

denso fuel pump

nismo 720cc injectors

new timing belt

wolf3d v4

k & n pod filter

themostat

i think thats about it, all the work was done by steve and the guys at top racing, who did an awsome job and were very helpfull (as i dont know to much about engines) and if there was a problem i was called straight away.... i only got it back monday and only lastnight finished my set km's to run it in, while running it in the rev limiter was set at 4000rpm, so shes goin back in there hopefully this week for the final tune, and i'll let ya know what numbers we get out of her,... a new diff and gearbox is on the save list next to we can go a bit harder maybe, but im not a tuner so i dont know ahhaha..

john also painted the engine and timing covers for me in an awsome white and purple pearl, some pics belove

cheers guys

post-10720-1143340032.jpg

post-10720-1143340259.jpg

Link to comment
https://www.sau.com.au/forums/topic/111110-my-rebuild/
Share on other sites

  • Replies 112
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

um i dont really know what hp we will get, im not a tuner, untill i get a new diff and gearbox i dont want shit to go bang... im hopin 400+ on a safe tune,who knows..

dint take to long month and a half, but we waited on parts more then anything, and the chinese new years aparently hold things up this time of year...

Link to comment
https://www.sau.com.au/forums/topic/111110-my-rebuild/#findComment-2052038
Share on other sites

aries87m forged pistons n rings

eagle forged rods

arp head and main studs

tomei poncams

tomei 1.5mm head gasket

acl racing bearings (main and big end)

full nissan gasket kit

os giken twin plate clutch

turbo side

custom hi mount s/s manifold

garret gt35r turbo with braided lines

turbosmart ultragate wastegate

new s/s intercooler piping

a/m 80mm throttle body and cable

greddy plenum

hks ssq bov

denso fuel pump

nismo 720cc injectors

new timing belt

pistons can be had for around 1400

rods a little more

cams are like 1k a set , gears around 400 bucks

see where im heading... add the sum of the parts together, then add labour, you might get a price without having to ask

Link to comment
https://www.sau.com.au/forums/topic/111110-my-rebuild/#findComment-2057716
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...