Jump to content
SAU Community

Manual Conversion Kit R32

DORIFT_PIG
 Share

Recommended Posts

BigMicky Proficient

BigMicky

Posted
Posted

The parts will cost $1200 - $1300, plus whatever you want to spend if your gunna upgrade the clutch.

Labour = free if DIY, or about $5- 800 if you pay someone to do it.

If you know what your doing, you can get it done in 10-12 hours.

32 4whore Experienced

32 4whore

Posted
Posted

^^^^^^^^^^^^^^^

thats a bit much. I know of ppl that will do all of it for $1200 - $1300. depending on if the clutch is upgraded or not. Just ring around and go with what you can afford. Im doing the same once i get the R32 4dr once this stupid loan goes through.

As R32FOURDOOR said try Z imports, my mate got his done there and it was a great job.

Good luck champ

  • 2 weeks later...
shorty_01 Proficient

shorty_01

Posted
Posted (edited)

People at Z imports Quoted me for my R33 S2 from auto to manual converion to be 1,400 with super ogranic clutch. (price will vary on Clutch u choose etc)

The cost includes installation etc... trans coversions at Z-imports are a common thing. Good people too

www.z-imports.com

Edited by shorty_01
TUF-200 Rising Star

TUF-200

Posted
Posted
ive got an rb20 gearbox you can have for $200....second gear syncro is fairly worn though...

Hey Ryan, I may be interested in this if u still have it. I dont suppose u have and engine package to go with it?! :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...