Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

cops dont do shit for car break ins.

gfs car got broken into, they took name, rego, parts stolen and chased her up about the damn TITLES of the CDs stolen for a week. WTF? go catch criminals not ring constantly asking exactly what cds were taken!

another mates S13 got nicked (the whole car) and he found it luckily a few streets away but they wouldnt come out for that until he footstamped and threatened until the did.

cops are useless unless your dead. then they seem to take notice.

no it is unless you speed, have big wheels, your car goes psssssttt, a loud exhust, or making clouds lol

then they are right up on your case

Thanks guys appreciate the support I have managed to source a window off another SAU'r at a good price which is great so hopefully that will help me save a few $$$. Big problem is when they cut the SAFC out my car is running like crap now it wont rev above 1700rpm am guessing because when the SAFC was installed they would have to cut and bypass a couple of wires. I will have to try and work out which ones have been cut and solder them back together. Hopefully I will be right but if anyone installed an SAFC and knows what wires I should be looking for or is an electrician (looks at Andrew) and is happy to lend me 5 minutes of phone time or pop out and have a quick look I would appreciate it (locted in the city area).

Cheers Leigh

If it was installed properly, it should have the plastic cable taps/cuts. Basically you put the original wire in and the wire from the safc in, close them up and it splices the original and feeds it into the safc wire. It would be pretty obvious which wires go where from looking at that. Thats if it was installed properly though :D

Otherwise its just a matter of matching colour to colour, wouldnt take more than 30 minutes to do.

Sorry to hear about it :D Exactly the reason I will never move to apartments. Their "secure" car parks seem to have the highest rate of theft.

no it is unless you speed, have big wheels, your car goes psssssttt, a loud exhust, or making clouds lol

then they are right up on your case

And they reckon they are not revenue raising........give us a break, any real police work and you can't find them, they're too busy hassling some super criminal [not] for doing 5km/h over the speed limit and extracting a hefty fine as payment!!!

spewing to hear Leigh, id hate for a car to be so violated,

regarding the not running right, if you have a wiring diagram for either the safc or car, find the AFM signal wire and join the two ends together, thats the only wire that needs to be cut when putting an safc I in, not too sure about the II but, if you need a hand, give me a buzz, should be able to fix it up for you.

I remember when i was working in Tuggers there was a crash at the lights near Tyre Power. It was fairly serious, cars had to be towed and stuff. The cops didn't get down there for a full 30-40 mins after the accident (even though the crash had obstructed the road at one point). Police station is like...2 minutes walk away. What the hell?

Anyways, sorry to hear it Leigh. :thumbsup:

Edited by p1r4t8r

again cheers for the kind words all and nik and andrew were right when the safc was installed it just needed the AFM wires reattached and it started running fine again. So things are starting to look better except that i am stuck with a 1980 honda accord for the next week or so lol its a beast :thumbsup:

If it was installed properly, it should have the plastic cable taps/cuts. Basically you put the original wire in and the wire from the safc in, close them up and it splices the original and feeds it into the safc wire. It would be pretty obvious which wires go where from looking at that. Thats if it was installed properly though :thumbsup:

Yeah if your dodgy.

Scotch locks/insulation displacement joiners should never be used, they degrade the integrity of the conductor, which leads to wires breaking, hot jointing, short circuits etc.. things i certainly wouldnt want when dealing with something that (partly) controls my engine.

Sorry for O/T, but unfortunatly Leigh, i think the only way to have a "secure" carpark where you live is to put a fence and roller door on your parking spot. but on the bright(ish?) side, karmas a bitch, theyll get theirs...

My housemate used the secure parking under my last place. i was forced to park in the vistor parking for a year. i never had one problem being outside, and my car was (is) a lot better than his (exa). someone busted into his car under our secure parking and flogged all his work stuff including laptop etc as he was driving to sydney in the morning for work and had packed the night before. i think if they (crooks) have to try to break in they will, but my car wasn't a challenge so they left it alone. very ironic i think

Sorry to hear that leigh..

that would be my worst nightmare someone breaking into my car..

your kinda right about the car parks.. altho they say there secure, with gates and doors.. its also means there tucked away.. noboys is around.. easier to do what you want without being seen.. Were as if your car is out side in front of and appartment. its more likely for someone to see once the alarm has gone off.. if you get me..

IT may be called secure.. but its so secure no one can see it.. which makes it an easier target.

i had it happen twice in my R33, but they never broke a window. i found out how they got in though, it's not hard to break into cars without window frames.

hopefully you can get your stuff back together without too much hassle, i hated driving around in my car after it was ripped open, it just reminded me all the time of the incident.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...