Jump to content
SAU Community

Questions About The Laws In Vic About High Powered Cars..


Recommended Posts

exactly. they are not brain dead and most can tell the difference between what is stock and what isnt.

this thread is about power to weight jar. not getting defected for modifications.....

lol

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Last time I got pulled over (random license check or some crap) all I got asked was 'does your number plate light work?' I said 'I believe so' and then he told me I didn't need to test it :devil: weird. Maybe I just look dodgy.

What year is the model?

Any mods are supposed to be included in the power to weight figure.

As hard and stupid as this is to do, it is the vic roads requirement.

The weights are as follows;

2 door

1989 -1991 1260kgs, 158 kws = over limit

1991 -1993 1290kgs, 160kws = below limit

4 door

1989 - 1991 1290kgs, 158 kws= below limit

1991 - 1993 1320 kgs, 160kws = below limit.

These are the factory dry weight figures, and power at the fly wheel.

A revision was made in 1991, as well as other changes such as the silver/gold GT badges were changed to white and blue or white and red.

Edited by Mulkers
What year is the model?

Any mods are supposed to be included in the power to weight figure.

As hard and stupid as this is to do, it is the vic roads requirement.

The weights are as follows;

2 door

1989 -1991 1260kgs, 158 kws = over limit

1991 -1993 1290kgs, 160kws = below limit

4 door

1989 - 1991 1290kgs, 158 kws= below limit

1991 - 1993 1320 kgs, 160kws = below limit.

These are the factory dry weight figures, and power at the fly wheel.

A revision was made in 1991, as well as other changes such as the silver/gold GT badges were changed to white and blue or white and red.

Crap, that means that my car is over the limit(2 door-1989-1991 158kws)I Better be careful from now on..thanks for the info

Most police arent aware of this. (as are most forum members,)

Recently i was pulled over and the policeman (familyfriend)

said that they had been given orders to pull up skyline p platers.

They checked that it was not a 2.5 and that the bov was plumbed back.

Most wouldn't know that the weights were changed, and just accept that they just pass.

Thats weird, because Im P plater too, and drive a 1990 R32gtst and have been told that my car is within regulations for P platers...have you done any extra mods?
I know that cops dont carry dynos with them, but a couple of years ago one of my friends got pulled over in a Silvia, and the cop started going through the engine bay and whole car, checking for anything thats not stock, and got booked for it...

Mods don't matter for the "power to weight ratio", but any mods done to the car would be altering emissions, which would then make the car defectable, and would require an EPA, which is why your friend in the Silvia got done for mods

What year is the model?

Any mods are supposed to be included in the power to weight figure.

As hard and stupid as this is to do, it is the vic roads requirement.

The weights are as follows;

2 door

1989 -1991 1260kgs, 158 kws = over limit

1991 -1993 1290kgs, 160kws = below limit

4 door

1989 - 1991 1290kgs, 158 kws= below limit

1991 - 1993 1320 kgs, 160kws = below limit.

These are the factory dry weight figures, and power at the fly wheel.

A revision was made in 1991, as well as other changes such as the silver/gold GT badges were changed to white and blue or white and red.

Do you know if those are the figures vic roads and the police carry?

Can someone with an R32 take a photo of their rego sticker and post up the weight claimed on it?

Thanks

Mods don't matter for the "power to weight ratio", but any mods done to the car would be altering emissions, which would then make the car defectable, and would require an EPA, which is why your friend in the Silvia got done for mods

Do you know if those are the figures vic roads and the police carry?

Can someone with an R32 take a photo of their rego sticker and post up the weight claimed on it?

Thanks

i reckon 90% of rego stickers ive seen are way off actual weights...my cousins VX clubsport says its like 1400kg...surely its up around 1600kg

i reckon 90% of rego stickers ive seen are way off actual weights...my cousins VX clubsport says its like 1400kg...surely its up around 1600kg

I'm just trying to figure out whether the cops go by vicroads rego weights, or they have their own figures

oh.. ive ben done for power /weight twice now.. so i got a bit of inside info

cops dont even think about the rego sticker tare weights, because they are all so so wrong...

police will say that modifications to a car under the limit count.. but at the end of the day, its up to them to prove if they dont have any written evidence (eg a stock car being over) .. you are innocent until provent guilty... therefor if you have a modified R32 gts-t 1993 (just under the limit) and throw on an exhaust, bigger turbo etc yes it will blaintently be voer the limit.. but its up to them to prove.. WITH evidence.. not jsut an assumption.

as for the fine.. yes every cop and his dog will hand out $110 and no point fines ... but technically it is supposed to incur a points penalty, however no police ever inforce that... i belive its kinda like a 3 strikes and your out type thing.. i got done twice for it.. the police then wouldnt let me drive home and said next time they catch me (strike 3) i get a summonse to court.....

this was in an R33 gts-t.. so yes.. over the list...

give me a minute and i'll scan a list i have of "imported" cars the victorian TMU police have all been given to look out for p platers driving them...

-Ruffels

Mods don't matter for the "power to weight ratio", but any mods done to the car would be altering emissions, which would then make the car defectable, and would require an EPA, which is why your friend in the Silvia got done for mods

Do you know if those are the figures vic roads and the police carry?

Can someone with an R32 take a photo of their rego sticker and post up the weight claimed on it?

Thanks

I just had a look at my rego sticker and my car is listed as 1350 tare weight..

pplaterestrictedimportedcars.JPG

sorry bout the massive pic guys.. if you complain enough, i'll change it to just a hotlink...

haha notice the cops put a tick next to my car to show me :@

-Mark

meanwhile the rego sticker on my car says 1100

i thought 32's were signifcantly lighter than 33's :blink: lol

Yeah thats shocking, thats why I imported the R32 because its lighter that the R33, go figure...

Thankfully,most of my mods were done in Japan, which are covered under my engineers report..

So if I get pulled over they wont crack it for an after market bov?

OMG so many reply's,

Im glad to hear that i can drive my car now next time i get pulled over i can confidentially say that my car is under 125kw per tonne..

thanks everyone..

i just hope the cop dosnt get pissed at me cauz he dont know anythin and start givein me canary's for everythin i got wrong with car..

bbut yea thanks again everyone.

Damn Ruffls, looks like that list is out to hunt Nissans! Have never even seen a Plymouth Prowler over here. I never realised a Ferrari 456 GTA was nearly 2 tonnes!

After looking at the list Ruffels posted, I noticed R32 GT-R isn't listed as cars to be enforced then does this means I can 'legally' drive R32 GT-R on my Ps?

I know R32 GT-R is over power to weight ratio that already make this car ILLEGAL for P-platers to drive so it would seem that this car is excluded from the list of enforced cars.

And also noticed that most of cars police are now enforced are imported under SEVS scheme, this got me wondering that any of 63 Australian delivered R32 GT-Rs are being excluded from the rule?

Could anyone shed the light of the question?

Cheers

Grant

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...