Jump to content
SAU Community

Recommended Posts

Was wondering what sort of times and mph most quick cars were running to the half track down the quarter. By quick i mean 10 sec cars using ET Streets or BFG's with pump fuel. Not fussed about slick tyred cars or cars running NOS.

The best 660 i have run is a 7.280 at 95.77mph.... but was wondering what half track i need to see to be confident the car will run mid to low 10's.

I basically want to run some half track passes and be sure the car will run a mid to low 10 before i get booted for not having the appropriate safety gear

Brad

Was wondering what sort of times and mph most quick cars were running to the half track down the quarter. By quick i mean 10 sec cars using ET Streets or BFG's with pump fuel. Not fussed about slick tyred cars or cars running NOS.

The best 660 i have run is a 7.280 at 95.77mph.... but was wondering what half track i need to see to be confident the car will run mid to low 10's.

I basically want to run some half track passes and be sure the car will run a mid to low 10 before i get booted for not having the appropriate safety gear

Brad

IDO11s,

In a late model IRS car I'd say you'd be pulling 110 MPH at half track to run a low ten second pass. 660' time would be 6.6-6.7s?

IDO11s,

In a late model IRS car I'd say you'd be pulling 110 MPH at half track to run a low ten second pass. 660' time would be 6.6-6.7s?

6.5 @ 110 is on the money for a low ten

for a high ten see Adrians previous post.

I have a better idea....let Andrea have a go....i think she deserves a try before the car gets banned.

Edited by DiRTgarage

thanks for all the replies guys. I was hoping i wasnt to far off the money but it appears i am still a fair way from what i need to be. Hopefully the new found power will help but i guess only time will tell. Bring on Friday!!!

Paul, i tried talking Andrea into racing it herself but she isnt worried about having a steer.... for some reason all she is worried about is the car going fast and it sadens me to think she hasnt even been able to enjoy it herself. But, its her choice and i guess i just have to accept it. I just hope i can do all the work we have put into the car justice this Friday and run a decent time with it. It will make both of us very happy if i can :):P

thanks for all the replies guys. I was hoping i wasnt to far off the money but it appears i am still a fair way from what i need to be. Hopefully the new found power will help but i guess only time will tell. Bring on Friday!!!

Paul, i tried talking Andrea into racing it herself but she isnt worried about having a steer.... for some reason all she is worried about is the car going fast and it sadens me to think she hasnt even been able to enjoy it herself. But, its her choice and i guess i just have to accept it. I just hope i can do all the work we have put into the car justice this Friday and run a decent time with it. It will make both of us very happy if i can :(:P

Ive seen first hand the upgrades you have done since last time at the track, id say the 10's in the bag!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...