Jump to content
SAU Community

Recommended Posts

just wondering what peoples opinion in the best turbo for a 1/4 mile for street mods?

i know people pulling 300rwkw but they have pretty slow times compared to cars that are 250rwkw

most likely due to lag... but i was curious which turbo would be able to spool as quick to achieve the best 400m on the streets. i know bigger turbos mean more power but is it really usable for a quick thrashing on the road? safety... all those issues such as suspension... the works

i know that graphs can show a lot of power but what it doesnt tell is how quick does it achieve this power to be able to use this on road for traction on street?

Link to comment
https://www.sau.com.au/forums/topic/114538-what-is-the-best-turbo-for-14-mile/
Share on other sites

Its not due to lag at all. Its due to car setup far more than power.

1) Traction is what makes your car fast (tyres/suspension)

2) Driver is what makes you car fast

3) Power is useless without 1&2 being sorted

Without the first 2 things down pat. The 3rd (power) makes little difference, its almost a hinderance in many cases.

I know using 330rwkw on street tyres. Best i could manage was a 12.1 with horrid wheelspin.

But i did run a 12.9 with approx 210rwkw, and using 225 street tyres :D

I had a reasonable 60ft of 2.0 and that got me the time.

The car was:

1) Setup well for the power

2) I could drive it well at that power

Putting down 330rwkw i had not raced it before, and the car certainly wasnt setup suspension/tyre wise to handle the extra power

And i get the impression your talking of street racing. Dont head down that line. That isnt tolerated on SAU.

cheers :)

type of car would be handy, otherwise we can't give you any feedback

also what times r u looking at? 11's, 10's or 9's? soo many variables so we really cant say X type of turbo would be the best for 1/4 mile runs

average power makes a car fast not max power

a car that makes a max of 250rwkw will have a higher average power than 300rwkw car. the 300rwkw will likely to have lots more lag, and it will be bog the dog or wheelspin city. the 250rwkw car will good average power and will be able to launch quite well with minimal lag

type of car would be handy, otherwise we can't give you any feedback

also what times r u looking at? 11's, 10's or 9's? soo many variables so we really cant say X type of turbo would be the best for 1/4 mile runs

the car would be a skyline r33 s2... the last thing i would hate is to spend money on something that wont benefit me as much as the price tag on the turbo

r31nismoid i dont plan to drag on the streets, just wanted to know what turbo would be best suitable to the roads we all drive on everyday without losing traction and using the most power out of a turbo setup without having a huge lag monster

what turbo would be best suitable to the roads we all drive on everyday without losing traction and using the most power out of a turbo setup without having a huge lag monster

apexi powerfc + boost control kit

stock turbo

cold air intake

fmic

3" turbo back exhaust with split dump

some good 255 rear tyres

camber kit

castor kit

pineapple kit

get suspension tuned

but i was curious which turbo would be able to spool as quick to achieve the best 400m on the streets. i know bigger turbos mean more power but is it really usable for a quick thrashing on the road?

Um, the best turbo for 400m on the street is no turbo because you are doing well over the speed limit in any state other than NT.

Big turboes aren't really that undrivable provided you have the traction available. You can chug around off boost in everyday traffic, but you know the power will come when you put the boot in. Also once you come on boost, it won't come off boost too quickly until you slow down again.

Also once you come on boost, it won't come off boost too quickly until you slow down again.

haha err whatever that means.... or is that just me?

this isnt answering your main question, but in terms of traction on the street, 300rwkw will always be difficult. If your car isnt setup well, it will be near impossible. My only experience with cars near that power was my old 180sx that had 280rwkw. That would sometimes wheelspin coming onto boost in 3rd gear, with pretty good tires, and coilovers.. Or you could take off from a standing start in 2nd gear, spinning all the way till around 100km/h ish.

As R31nismoid said, there a lot more things that come into doing quick times (quick is a more of a personal opinion anyway) than just power, or even smooth usable power... Its useless if you cant get it to the ground efficeintly.

- Also what kind of R33 do you have? How will you drive it on the street? And what is your idea of a quick time?

Edited by Cool Hand Luke
haha err whatever that means.... or is that just me?

Okay maybe I didn't word that quite right. What I meant to say is that when you are thrashing around the racetrack *cough*hills*cough* you keep the rpm high, no lower than say 4000rpm at any one stage. So when you get back on it, you will have boost instantly. You don't have to worry about spooling up again. Or is this just an SR thing? Are the RBs different?

apexi powerfc + boost control kit

stock turbo

cold air intake

fmic

3" turbo back exhaust with split dump

some good 255 rear tyres

camber kit

castor kit

pineapple kit

get suspension tuned

spot on!

seen this done on a dvd to a GTR, guy ran high 11's... plus he had race fuel with a tune and more boost.

We are talking GTST not GTR arent we? RB25DET will make high 200 kw at tyres comfortably with stock internals and correct combination of bolt ons on pump fuel, which im sure has been well documented on this forum, as of choice of turbo, It depends on wether you are willing to upgrade other parts e.g exhaust manifold etc. GCG do a BB highflow which is good for around 230kw+ retaining standard manifold & plumbing, but will require ecu, injectors, fuel pump, boost control, to make that power. I personally like the GT 35/40 with ar.82 exhaust housing. I have a customer with this setup running mid 11s at 124mph on pump fuel, and car is very streetable, can drive it to the shops to get milk. but to run these numbers, you really have to be sixty footing around the 1.7sec mark, this is where your tyre and suspension will come into it as said in previous posts. nothing a set of MT 255 50/16 wont fix.

spot on!

seen this done on a dvd to a GTR, guy ran high 11's... plus he had race fuel with a tune and more boost.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...