Jump to content
SAU Community

Recommended Posts

OUCH!

and oi Chris.. You might provide the cable ties, but remember I'm the one that does the tieing! :(

oh, and I'm with thomas RB26!

This is a VERY complex discussion that can go on for ages, and will surely piss the rest of the whores off if we discuss it in this thread, but in a nutshell, all things being equal, a normal stroke RB26 is better for big power on street fuel than using an RB30 crank for the following reasons-

*The piston speed is lower at the same revs

*There is less side thrust exerted on the bores by the pistons, due to less conrod angular/side motion (less heat/friction)

*The Piston spends more time in the dwell state at TDC and BDC

*The Bore/Stroke ratio is much better (over-square engines like to rev harder)

Which helps, briefly, with the following

*Keeps frictional losses down (engine lasts longer, makes power more easily)

*Helps secondary balance

*Optimises manifold air speed at high revs

And blahdy, blahdy, blah. [/end rant]

Nissan could have made the engine 3L if they wanted to, but they didn't.

P.s 2JZ's and RB30's both have around 6800rpm limits from the factory, which is the same piston speed as an RB26 at 8000rpm.

  • Replies 240
  • Created
  • Last Reply

Top Posters In This Topic

Ouch... how much damage to the head (esp the combustion chamber on 6)?

Pretty respectable effort, haven't seen something that smashed for a long time!

Edit - that quote from R32R at the top of the page is wrong, very very wrong. I think he's got things crossed up.

Ouch... how much damage to the head (esp the combustion chamber on 6)?

Pretty respectable effort, haven't seen something that smashed for a long time!

Edit - that quote from R32R at the top of the page is wrong, very very wrong. I think he's got things crossed up.

That's what I thought too but I'm glad somebody more knowledgable than me said it first.

But but but, if RB30 bottom ends are so good, then why can't I get a crate engine with an RB30 bottom end shipped from Japan? (innocent look)

No one will do it for me! They all say something along the lines of, "Are you stupid?" (innocent look)

(...stupid for asking them to build it, not stupid for asking them to build one and send it)

Seriously though, I'd like to hear someone that is all for RB30's tell me why they're better. I have no idea.

..uhm..so as not to hijack mona's thread, this is for your benefit too moonie :huh::(

i've heard RB20DE
It will be sweet when it has the CA18DE in there, should be an animal,ooops I've said too much.........

Personally, I'd be going for an L16 and turbo, blowing through a decent sized carbie of some sort - 45mm Weber, Dellorto or SU, side-draught of course... :huh:

im sure u can cable tie it back together.. no biggy
Bit of gaffa tape and she'll be all good again..

Ahhh, cable ties and gaffa/electrical tape - the drift/drag/circuit racer's and mechanic's best friend! :(

Seriously though, that is some heavy duty damage. :rofl: Mona, you should keep the parts and display them somehow for memories. Ahhh, the good times!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • This is aem disk setting in aem tuner and still 180 dgree off or ignition on exhaust cycle is it from cas it self as cas seems wouldn’t fit in cam shaft if wrong position and wiring been verified any ideas 
    • Oh yeah that would work excellent. Should be the same diff housing & everything. Shoot me a text or call me 260-750-2246 -Cody 
    • Oh right, I didn't realise it was your car. Please do! Makes me feel better about mine. I also have a big scrape on the front left bumper where someone presumably used the wall to guide the car into a parking spot  But somehow all the funds go towards mechanical things and the cosmetics stay forever unfinished... Interesting, I don't think I have seen it before. But after seeing @PranK's rusty roofline on the BMW I'd probably leave it alone. Wouldn't want water to get in there.
    • Thanks mate, thought you might know the answer.     
    • Infiniti US are teasing a manual Q50 as a way to refresh a (very old) model. https://torquecafe.com/manual-performance-sedans-arent-dead-yet/ Can't be too technically difficult given the Z has the same motor with a manual gearbox......here's hoping there is a JDM version we can import here, that would save me a world of headaches
×
×
  • Create New...