Jump to content
SAU Community

Recommended Posts

  • Replies 234
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Well that was a awesome day!! Or should i saw few hours... a little late with arrival, but as they say, better late than never!

First track day for the Ceffie and WOW... she does alright!!

Running about 6 psi thru her just to play it safe since the rebuild and according to Sh@un's hand timing, doing around the 1:32's.

So once i actually turn up the boost to something decent, should hopefully be down in the highn to low 1:20's..... :(

Thanks again, great day and well organised!

Any one else got vids or piccies??

Yeah i am sitting here @ work yawning my head off, drinking the mulitple cups of coffee. Leaving home @ 6am & not getting home till 9:30pm takes its toll!! But worth the excitement

OK - so the story with mine.......

Out in the traffic early i was doing 1.40's, did about 10 laps then came in to adjust the harness and check all was well, it wasnt.

Thanks to fatz who spotted the leaking oil i discovered the dipstick was blown off and there was oil all over that side of the engine bay, so that was a shock after all the prep and "testing" done over the last few days

So after an oil change (Cheers again Richard for the ride and tools) i was ready to have another go, Shauns hand timing was a 1.34 in that session, did 4-5 laps, came back in, it had blown off again.

Im very sure that with decent tyres (at least. i hate understeer) and the ability to use 100% throttle down the straight and a few select sections i can reel off something around 1.27. But ill have to have another go :D

After some attempts at a repair we realised it couldnt be done without changing the recirculating system, and we didnt have pipes/plugs etc, so i let it sit for a while then had a go in that last pit stop race, in which, it ran out of petrol.

The track was magic, and the weather couldnt have been better

Ill be back with semis (i was running worn out cheap road tyres showing belts) and the oil system sorted out

Thanks to everyone for a great day

Benm with the broom, Paul for the organisation and that toolbox, Aaron McG of course, Richard (and mate) for the lift and tools, Shaun for helping out, James for pics, MS and Aaron P for vids.....if i forgot anyone im sorry

After some attempts at a repair we realised it couldnt be done without changing the recirculating system, and we didnt have pipes/plugs etc, so i let it sit for a while then had a go in that last pit stop race, in which, it ran out of petrol.

The track was magic, and the weather couldnt have been better

Ill be back with semis (i was running worn out cheap road tyres showing belts) and the oil system sorted out

Thanks to everyone for a great day

Benm with the broom, Paul for the organisation and that toolbox, Aaron McG of course, Richard (and mate) for the lift and tools, Shaun for helping out, James for pics, MS and Aaron P for vids.....if i forgot anyone im sorry

Sounds like you still had a good day. sometimes no matter how much you prepare something still goes wrong. let's hope it's nothing serious.

I hope you liked fanging around narellan in the worked diesel truck.. haha i was actually thinking about taking it out there for one of the 5 lappers. i reckon with a good handicap i could make that thing pretty hard to pass anywhere but on the straight lol.

Spencer and I had a top day, in fact in all our race meets and testing etc together it was probably our most trouble free day, even with having just finished re-welding the exhaust the night before, only to nail it going on to the trailer. we used pretty much a whole set of pads, and 3 drums of fuel (plus the tank) and all the adrenilan we had spare. I wish i was out there right now, actually maybe tomorrow cause i need a rest day. driving that car is more addictive than my GTR cause every time i think 1 cool down lap then in, i give it a hit on the straight and then think, damn i just want to hear it down the straight one more time... hell i kept lapping till the track owner radio'd Aaron asking why there was 1 car still out there doing laps at near on 5pm... haha

Ben, if i see you at a another track day, with a working (or even semi working) GTR spectating not driving i will tear up your excuse book, confiscate the keys and take it out myself :D:)

hehe.

Hey guys,

A big thanks for organising this.. realli enjoyed myself although my car wasn't realli prepared for the trashing.

Brakes going soft after 5 laps .. Had to pull out of the 8 lap thingy. Furthermore there is something wrong with the car when i was at the 2 turns before the bridge. I step on the acceletrator but it jus wouldnt go. Had to release and step again a couple of time before it worked. Hmmm .. wonder wats work.

Anyway, learnt alot from the trip and am looking forward for the next one.

Cheers

Jay

problems with power out of the right handers is most likely fuel surge (did you have less that 1/2 tank?). it's quite common. the only easy fix is put more fuel in the tank!




  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...