Jump to content
SAU Community

Recommended Posts

Having a dyno run is pretty straight forward, get a quote from Unigroup, Unique autosports, Bel Garage and CRD and then decide.

But...off topic...did you get hold of a Nismo GTR? I heard about 1 beign in sydney the other day?

I would have to say that also if you where in South Australia you would also take it to Tillbrooks Auto & Dyno

Thats where Martin Donnon Started I believe and still does some tunning at times John Munro had his cars built there and Mick Stanic from Sub Zero was there too before his father took him back and went to India.

OK OK OK This is for Sydney but just thought I would through that in. CRD ALL THE WAY for SYD

if i were in SA, i would definately bring my car down to Willall racing, Keir Wilson is probally THE most experienced GTR guy in australia.

Edit: sorry, just realised he meant in sydney. sorry!

Unigroup or CRD are probrably your better bets. If you don't have a large budget Unigroup are very cheap and I've had friends getting good results there. CRD are also good, but you will need deeper pockets.

we've had experiance at a lot of tuners in Sydney, but by far CRD is the best.

Just go round there one day and check out some of the massive horsepower GTR's they work on.

cheers

As with Ben, CRD tunes my GTR and it wont go anywhere else.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...