Jump to content
SAU Community

Recommended Posts

Yo!

If I get someone to convert my auto R33 to a 5SPD Manual one, would it go much harder? would I gain the lost KW that auto transmission loses through the drivetrain?

Once converted, would I be able to use Apexi Power FC and all that stuff ???

Would it drive and feel like a proper manual?

Is it worth Converting if I want to turn my car into a animal??!?

Thanks

Yo!

If I get someone to convert my auto R33 to a 5SPD Manual one, would it go much harder? would I gain the lost KW that auto transmission loses through the drivetrain?

Once converted, would I be able to use Apexi Power FC and all that stuff ???

Would it drive and feel like a proper manual?

Is it worth Converting if I want to turn my car into a animal??!?

Thanks

mate it depends on wat ur guna do with the car.. drag, drift or a streeter... drag= tuff auto, drift=manual, streeter = wateva ur comfortable driving

if you convert an auto to a manual it will run perfect if done right. You can use a power fc and everything like that. You can have a tough street/drag/drift car with a manual also have a tough drag/street car with auto. With a skyline i would personally use a manual, way better than autos also alot more fun to drive.

Why did you buy an auto if you wanted a manual?

I agree with WazR32GTSt.

Just trick the auto up with a shift kit and put a decent cooler on it.

The $2.5k you can spend on getting a manual box fitted, could be spent on the engine. General cost to do a conversion(box+labour) is $1500 - $4700 depends on the mechanic and who you know etc etc.

I already looked into this sorta stuff before I bought my car. You would've been betteroff if you just bought yourself a manual in the firstplace.

If want to get back those kw you lose through the auto, spend the money on your motor....

Edited by KeyMakeR33

Here are a few things you will need;

Gearbox

Gearbox crossmember

Tailshaft

pedal assembley

clutch master cylinder

clutch slave cylinder

clutch

flywheel

bell housing

center console

dash cluster

computer

some fluid lines

manual spigot bush

It all adds up plus labour, I thought about doing it but in the end I thought about $2500 on an auto rebuild would make it go harder then most manuals (with the same power of course) in a straight line. So if it is only straight line speed you want then Automatics are easier and change faster therefore loosing lees boost :thumbsup: . I have also heard with a manual valve body on your transmission then you can put a PFC on it because it changes gears by itself not the computer.

I also just bought a Davis Craig ATF cooler off of AlexCim in his group buy, I will be installing on the weekend.

http://www.skylinesaustralia.com/forums/in...howtopic=111628

Chris

It's easy to do yourself once you know the procedures for each component such as aligning the clutch, spigot bearing, and bleeding the clutch. The rest is bolting it up.

I've never done a manual conversion before. Did it in my garage and all is working well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There is a way, but it's not with the same cars. You need to find the same vintage of car, that we had. Realistically, that was an affordable car with aftermarket parts around. So what people need to find is a car that had a decent base in its day, and can be modified. They're looking for a car year make of 2010 to 2015 really... Aus could have done it if Holden didn't fold as V8 commodores were cheap, and if Ford didn't get expensive thanks to COVID, then you could cheaply play with FG Barras. Realistically, those are just a bit heavier, four door skylines. I'm sure the US and UK have similar cars they could find.
    • Haha I do that.. thats when it chirps..The bit point for me is almost non-existent. Otherwise I stall it. But yes, in terms of performance, the clutch is solid af.
    • Greg speaks wisdom. These dirty old Datsuns are only value when they are cheap. When they are not cheap, there is no value. Sounds contradictory, but it's true. We are now 20 years past the hey day of modifying cheap 90s JDM cars for small amounts of money. This is a different world. If you are rich and can afford not to care about what is effectively wasting money on an old Datto shitter, then I have no reason to argue against it. But if you are wanting to experience what we all experienced back in 2005 (and I bought my car last century!) then there is no way to do it.
    • Short answer: No. Medium answer: No, because you still need to conjure the things out of thin air to bolt them to a NA to make it a NA+T. Long Answer: No - The things you need to conjure - meaning a turbo, intercooling, manifolds, exhaust, intake/manifold/piping, clutch, injectors, fuel pump, AFM (?), ECU + Wiring (woo, N/A loom fun) have to come from somewhere. You could have many scavenged these things from an OEM car that someone had upgraded from and use some of these. This will be cost prohibitive now, especially so in the USA. You'd probably pay the same for newer, upgraded components that are better than old OEM stuff from 25-30 years ago. None of these big ticket items are re-usable for the N/A car. Why not buy new and upgrade while you're there? The only real consideration is turbo and fuel sizing and determining whether you want to stay within the bounds of the OEM engine or get into rebuild territory. These limits ARE lower with a N/A motor and especially N/A gearbox at the starting point. And if you're gonna upgrade those then you may as well consider having them built to begin with. Because everyone here knows you're never far from that next engine rebuild once you start making the power you want... The cars you see on the internet and SAU etc have been built over decades. If you're really clued in... you would sell your US car to somebody for what you paid for it. You would then scour AU JDM pages or SAU and buy a car like Dose's on this forum with your powerful American Dollar. This will save you so much money in the long term. Importing it could be tricky. Or it might not because USA. I have long said the only reason 90's Japanese stuff took off was because a) Japanese people had Japanese cars so that is what they used b) Australians could import these cars to Australia with very minimal changes and use them on the road here c) Neither country had well-priced access to US or EU Sports Cars. I don't believe the JDM scene would have taken off in Australia at all if we had EU priced EU BMW M offerings, or more especially the AUS V8 Scene would never have existed if we had the multitude of US cars like Camaros, Mustangs, Corvettes at the prices you folks do. After all - Do the math. I would say put a V8 in your R34 and that's the smart way forward. It is. I did it. I know this from my own experience. But at that point there's no reason to simply not buy a C5 or C6? It would be simpler and easier and cheaper and bette-
    • Reading all this... hurts lol. I have an ENR34 5MT and I paid an inflated USA price for the car alone, had to do tons of preventative maintenance past that, and so I'm over $30K USD into the car already and haven't even touched power.  I wanted to +t it. Not even trying to make GTR numbers, I'd be happy with 250hp.  Can I get away with paying much less to make that happen?
×
×
  • Create New...