Jump to content
SAU Community

Recommended Posts

Hi All,

Yesterday when I went to pick up my replacement tail lights, I spoke to Wayne at GTAutos, with regards to the x-force exhaust system. It will cost me about $1,400 fitted and is a turbo back 3.5inch system. I tried to do a search to see if there was any reviews on this site regarding that particular model - but couldnt find any. Both wayne and his mechanic, run the system and say it does wonders. It sounds great too. My friend told me that $1,400 can get a good HKS exhaust. Is that true?

My question is, does it really matter what brand the exhaust is? Would something like HKS give out a better power rating? Would the car need a tune or anything if I do end up putting an aftermarket exhaust?

Any advice would be greatly appreciated guys/gals :nyaanyaa:

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/118652-x-force-exhaust-system/
Share on other sites

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

There will be a negligible power difference between X-Force and HKS.

However the exhaust note will be different. Personally I think the X-Force ones sound excessively loud and droney while the JDM branded ones sound better and also quieter.

And no your car won't need a tune after an exhaust system is fitted.

And from http://www.nengun.com -

HKS Hi-Power catback - AU $ 893.97

HKS polished front pipe - AU $ 308.80

and you'll need a dump pipe too

The xforce exhaust is based on the jap versions cept its made in china so its abit cheaper. They'll make pretty much the same power as all the others..

I've got the 3" xforce on mine and it made about 25kw or so.. slap your car on the dyno would ya cause i wana see what you get with the 3.5" please :nyaanyaa:

mines not to loud at all realy... infact when i took the silencer out i was surprised that it didnt evan get much louder.. it sounds pretty cool though i rekon, not as cool as a wrx though :nyaanyaa:

However the exhaust note will be different. Personally I think the X-Force ones sound excessively loud and droney while the JDM branded ones sound better and also quieter.

ive got a tanabe cat back, and let me say, tiz quite disapointing noise wise....some people would love the fact taht you get the gain of a 3" exhaust, but the lack of noise upsets me :O

justins xforce sounds tough, so ill be replacing my jap cat back with it shortly :)

1400 is a rip off

xForce Stainless Exhaust System - Skyline R33 GTS-T Price: $950

pay no more than 200$ for fitting

i picked up a mild steel one for 699$ for my old 33

they are louder and more droney than my current trust setup

but they do the job and their cheap .

Edited by arkon
So Xforce is the closest thing you'll get a skyline sounding like a Wrx? Can anyone who has one record some audio of it? I'm shopping for an exhaust atm as well.

skyline sounding like a wrx? maybe if it dropped a cylinder.

The roar of a skyline is far sexier then an wrx.

Wow, my X-force turbo back cost me $650 fitted myself.

From the cat back they are not any worse from a performance point of view but the big name brand cats and dump pipes are usually (but not always) better.

I would like to replace my dump pipe with a proper CES split dump and "high flow" my current x-force cat. The rest if fine.

Hi All,

Yesterday when I went to pick up my replacement tail lights, I spoke to Wayne at GTAutos, with regards to the x-force exhaust system. It will cost me about $1,400 fitted and is a turbo back 3.5inch system. I tried to do a search to see if there was any reviews on this site regarding that particular model - but couldnt find any. Both wayne and his mechanic, run the system and say it does wonders. It sounds great too. My friend told me that $1,400 can get a good HKS exhaust. Is that true?

My question is, does it really matter what brand the exhaust is? Would something like HKS give out a better power rating? Would the car need a tune or anything if I do end up putting an aftermarket exhaust?

Any advice would be greatly appreciated guys/gals :P

Thanks in advance

Edited by JCMarshall_Law

Hmm, I checked with x-force themselves, and another exhaust workshop. The RRP for the system is at $1600. The workshop qouted me a price of $1,500 (including fitting). I checked some of the online stores, but none of them have the turbo back system - they all have cat-back and then I will have to spend extra on the other items like the dump pipe etc. All in all, it comes to over $1200.

Anywhere else I can check around melbourne?

i see that ebay one has had the resonator cut out. wonder how much louder that would make it. i got the same setup but have the resonator in.

to get it sounding a bit different get an oval muffler, like a jasma or a lukey and take out the center resonator. a guy in town has that and it sounds pretty mean. different to most others.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...