Jump to content
SAU Community

Recommended Posts

hmm bait then for a bigger fish ???? lol nah I found when i had fish as long as the tank was a bit dark for the first month they normally all survived. On top of checking the water constantly

BBLLLUUUGGGHHH!!!!

well i'm off to bundaberg 2morro for 2 whole damn weeks of glorious overtime and perpetual on call fun filled hijinx :)

i'll be sure to post some pics of the respray job when i get back tho!

keep on truckin yall :(

Yeah Isacc my car is sorta back together

Im gonna run the high flow at track day as i dont have the time to do the GT30...

My injectors have arrived too so im not waiting on any parts now. The new disc are in and the new pads and fluids are all done. The new clutch is in and biting hard and the car is now sporting a new 250rwkw figure...

In short i have a new company car and dont drive the skyline enough, but im liking the fuel economy im getting from the VZ...

I have a list of stuff ill be selling once the conversion is complete but until then its all being used...

I do have a heavy duty clutch and pressure plate with 70% meat still on it. Plus a full set of standard disc's and some brake pads with 90% meat still on em...

The new rotors are really good they just dont fade...

Its probably a combination of the disc, pad & fluid. But yeah i got the best brakes ive ever tried now...

well i'm pissed at the brake setup i have.. about a year ago i put in new dba slotted rotors and bendix ultimates, pads wore down after 12months and had eaten away at the discs (guessing due to the harsh metal content of the pads) to the point where they only just scraped through minimum thickness after a basic machining (werent warped either). I only did one trackday too :(

I have a list of stuff ill be selling once the conversion is complete but until then its all being used...

I do have a heavy duty clutch and pressure plate with 70% meat still on it. Plus a full set of standard disc's and some brake pads with 90% meat still on em...

hmmm well dont know if id go back to standard rotors unless i was being a tightarse, but i could be interested in the clutch - mines only a few months old but im convinced theres someting wrong with it, gotta get dan to have a look and see

Ill sell my clutch to ya for a carton of coronas... Cold of course... The clutch and pressure plate was worth $600 when i bought them a year ago...

As for the rotors, anyone who wants the whole set and the pads can have them for a carton of caronas also...

The brake pads were $200 and still have 90% meat, and the rotors are worth a few bob i reckon...

But ill post up a for sale thread soon, when i have time...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...