Jump to content
SAU Community

Recommended Posts

Ummm, so if you feel like this this morning, dare I ask why you got jiggy with her in the first place??? :laugh:

no one will ever know :P

i dont have pics shanef, she not here! i dont think she would let me take them either :)

didnt look. At work, and I work next to this old fart who talks too loud, complains too much, has too much pride and is very ignorant.

You can tell I love my geariatric co-worker. He studied network engineering for 4 years at tafe, he reckons, and I had to walk him through pinging an IP address.... Fool.

i know, we had a convo bout it when he out it up :laugh:

edit: also i'm at work and cant search for things like that really since the boss views everything i do.

Edited by lilmike86
You can tell I love my geariatric co-worker. He studied network engineering for 4 years at tafe, he reckons, and I had to walk him through pinging an IP address.... Fool.

roflcopter

That is a very complex task though. We had a very expensive phone tech flown up from Sydney to fix a PABX issue, who looked all confused when we explained that a TCP/UDP port didn't necessarily refer to a specific plug in the back of the machine. They didn't charge us for his visit... :laugh:

Hi Lee :)

now check out Lee's av...those are nice boobs :kiss:

Hey karen, the Lady Owner from the mt Gravatt Car wash Place wants you to contact her cos they want to do a special deal for the club, she gave me her card and asked me to give it to you....

lee where were you when i needed cheap seafood :P

oh and how was ur xmas?

Xmass was Awesome :laugh: But now i need Sleep!!! How was yours?

Cheap Seafood you say, he he he we sold out of suitible seafood on Friday the 22nd, it was crazy :laugh:

i know, we had a convo bout it when he out it up :D

edit: also i'm at work and cant search for things like that really since the boss views everything i do.

:P Sux 2 b U Mike.......

just say its work related!!!!

Xmass was Awesome :) But now i need Sleep!!! How was yours?

Cheap Seafood you say, he he he we sold out of suitible seafood on Friday the 22nd, it was crazy :P

mine was great - i went up to bundaberg to my g/f folks cane farm and actually enjoyed it :laugh:

and i was after some good fish, but didn't know where to go, i ended up getting some red snapper fillets from coles but they were $24/kg :laugh:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...