Jump to content
SAU Community

Recommended Posts

rubbish....the old skewl days were awesome....if only someone from old skewl days was here they would remember teh days of charlie, slayer, smooth and squizz. And many other humerous ppl.

meh

charly's disappearing act is working a treat for everyone

heard of slayer's old days and wouldnt mind hearin more of them actually

only old skewler around now days is marc

meh

charly's disappearing act is working a treat for everyone

heard of slayer's old days and wouldnt mind hearin more of them actually

only old skewler around now days is marc

what about karen? oh wait, she's just old!

*runs and hides* :P

meh

charly's disappearing act is working a treat for everyone

heard of slayer's old days and wouldnt mind hearin more of them actually

only old skewler around now days is marc

im from 02 but i've changed users twice, when i changed plates....yea twas pretty funny back in the day. There are still a few old skoolers around, not many post very often though. The forum has gotten pretty huge!

Edited by 33NIZ
im from 02 but i've changed users twice, when i changed plates....yea twas pretty funny back in the day. There are still a few old skoolers around, not many post very often though. The forum has gotten pretty huge!

i aint changin my plates! these plates rock

best investiment i've had yet i think.

edG is old skewl?

i'd hide if i was u man

think my payin out of her bein old is gettin older then her anyway

:P

*whispers* already hiding john!

its ok, the real postwhore is back, me :(

mmmmmmmmm fatty goodness

your not fat! and your not good! no fatty goodness for you!

rubbish....the old skewl days were awesome....if only someone from old skewl days was here they would remember teh days of charlie, slayer, smooth and squizz. And many other humerous ppl.

SLAYER!!!!!!!!!

\m/

btw wheres glenn, hes never on here anymore and hes not on msn very often either!!!

Dunno, haven't seen much of him at all. I miss his gratuitous plugs for Chapman & Chapman :yes:

Eug is still pretty active

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...