Jump to content
SAU Community

Recommended Posts

Still looks like ass though..

R35 yes

nearly 4pm, nearly time to go home, yay, some one sell me an apexi power intake bracket.. else ill be making one...:ph34r:

give me money and ill make

Aaahhh soooo, yo have smok for ozzy boy, ruv you rong time.

wtf.?

you're right... it's more shane like to beg :wub:

... to get any sort of action

soo true

letkun00img600x45011961pk1.jpg

thoughts??

LM GTs? correct.?

i dont really get much of a choice in the 4 stud pattern, they are made in limited numbers.

plus my car is black... so bronze suits??

yes it does. seen my 180sx.? black with bronze rimmos

i think about them when i maturbate....i mean errr yeah get them! :)

+1 more so top secret gold volk GT-Cs only if they came in 4 stud.

ie. fords and holdens! Geoff would know, cause there would be a set on his xr8 uterus :yes:

bahaha

4stud ftw.. no point going 5 stud unless i wanna run the R32 GTR rear end.

LM GTs? correct.?

lm gt4 correct

yes it does. seen my 180sx.? black with bronze rimmos

noice... thats what i want to hear

+1 more so top secret gold volk GT-Cs only if they came in 4 stud.

they are a tasty rim too.

another favorite are the ssr professors, rare'ish in 4stud.

wish they made the do-luck double6 in 4 stud.

lm gt4 correct

noice... thats what i want to hear

they are a tasty rim too.

another favorite are the ssr professors, rare'ish in 4stud.

wish they made the do-luck double6 in 4 stud.

evening eugene whats kicking bro.

yay. my rim spotting skills are awesome.

Drift teks are very similar. aswell

hey there, just got home from work.

ohhh some SSR works came up on ns.com under thuy homerrules thread.

also i love CE28Ns and XD9s friggen noice. but alas im either getting dori teks or emotion CR kais

i've been following thuy's thread - some are nice, but out of my budget for racing rims.

CE28Ns are another nice one... XD9s are alright, but i prefer them on a more aggressive S15 type car.

l_bd5bb17cbe7ecc5a9c39f13e7608d9c3.jpg

bronze on black car..

haha dnt have them plates no more..

wanna get white doriteks

doriteks = drifteks? i have read conflicting reports about them clearing the bigger sumitomo brakes, and plus i dont like seeing the other empty stud holes.

those rims you posted have some wierd spoke/offset/dish pattern. no way in hell that rim would fit big brakes under it.

hey there, just got home from work.

i've been following thuy's thread - some are nice, but out of my budget for racing rims.

CE28Ns are another nice one... XD9s are alright, but i prefer them on a more aggressive S15 type car.

doriteks = drifteks? i have read conflicting reports about them clearing the bigger sumitomo brakes, and plus i dont like seeing the other empty stud holes.

those rims you posted have some wierd spoke/offset/dish pattern. no way in hell that rim would fit big brakes under it.

yeah thuys stuff is expensive as. but he dnt sell shit either. XD9s are nice.

yeah ive read that the drifteks clear R32 GTST R33 GTST and R32GTR calipers. but also heard of them not.

as my mates R33 GTST got 1mm clearance on them.. pfft pretty lame.

yeah the rims i have are and older volk copy. they are light as hell to be honest. lighter than my old enkeis.

im planning on using Std SR rims and using a 5mm spacer with them. should clear. should..

if all else fails some work cr kai emotions will work.

yeah thuys stuff is expensive as. but he dnt sell shit either. XD9s are nice.

yeah ive read that the drifteks clear R32 GTST R33 GTST and R32GTR calipers. but also heard of them not.

as my mates R33 GTST got 1mm clearance on them.. pfft pretty lame.

yeah the rims i have are and older volk copy. they are light as hell to be honest. lighter than my old enkeis.

im planning on using Std SR rims and using a 5mm spacer with them. should clear. should..

if all else fails some work cr kai emotions will work.

no true, he doesn't sell crap stuff - but he does put a large mark up on the rims he gets. mostly from the yahoo auctions i believe.

yeah i was after some light rims, my sparcos are light - and these lm gt4s are lighter again 7.6kg each!! in negotiations with the seller, should get an answer by tomorrow night. hopefully be able to reduce some weight and get more response.

yeah 7.6kg is amazingly light. they do look like the Bee*R, but i think Bee*R copied the lmgt4????? maybe?

i havent tried the wheel alignment system properly to be honest, it's pretty much a no brainer - it's simple physics there's really not much margin for error unless you're a complete idiot.

won't be doing track days for a while, i'm in the final stint of my honours at uni - will be graduating mid 2008, so it's one of those times where you buckle down and just do it. if i get these rims, i'll be throwing on some semi slicks, with the wheel alignment setup and my camber/castor bushes i'll be looking at shaving off another 3-5 seconds hopefully.

watch out ianb :)

hey there, just got home from work.

i've been following thuy's thread - some are nice, but out of my budget for racing rims.

CE28Ns are another nice one... XD9s are alright, but i prefer them on a more aggressive S15 type car.

doriteks = drifteks? i have read conflicting reports about them clearing the bigger sumitomo brakes, and plus i dont like seeing the other empty stud holes.

those rims you posted have some wierd spoke/offset/dish pattern. no way in hell that rim would fit big brakes under it.

the Drifteks clear my Brembos easy....but that has a bigger rotor too so the caliper is further from the hub giving more clearence

the Drifteks clear my Brembos easy....but that has a bigger rotor too so the caliper is further from the hub giving more clearence

i think mark was talking about the 'copy' drifteks. not the ones you have

i think mark was talking about the 'copy' drifteks. not the ones you have

there is copies of Drifteks now!

copies of drifteks which were copies of BeeRs which were copies of LMGT4s...the world as gone crazy lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...