Jump to content
SAU Community

Recommended Posts

Funkeh, anywhere up here is better than Melb.

I even have a coffee shop in Ippy that serves better coffee than I have ever had in Melbourne. And as someone always in demand for executive coffee meetings and lunches I sampled a hell of a lot there in some well regarded places.

The Shame Melbourne, you pack of faker wannabes.

As much as I give Ippy crap, it’s not that bad in the good area’s I gotta admit. Not that far from Brisbane and in terms of real estate (that ive noticed) your getting a lot more for your money.

My old man reckons he saw a heap more infrastructure going up last time he was there as well.

Edited by Nismo_Boy
you like home brand dog food too Joshwa... :)

for the dogs of course :)

hahaha, my collies get chicken necks, bitch!

But being serious. Think about it, people my age wanting to enter the real estate market. Most arent on "good" money, most dont have a big deposit ect. Ive seen some decent homes in "do-able" price range's there.

Real Estate in Ippy has made me more than $130K in the last 10 months. But everywhere is what you make of it and the lifestyle suits me. Besides, I can always go and splash the boat in anytime, as well as the new 40footer is arriving next week so that will always be in the water.

Real Estate in Ippy has made me more than $130K in the last 10 months. But everywhere is what you make of it and the lifestyle suits me. Besides, I can always go and splash the boat in anytime, as well as the new 40footer is arriving next week so that will always be in the water.

What kind of boat? Dad used to work for Ocean Alexander but I think he is going to Riviera last I heard.

I have a fetish for big boats <3

Game on with popo i think not they came knocking last night at 10pm...wtf is with that...

Rude fkers! Knobers used one of those gate scanner things and opened the gate house at my old house one night and waited for my turbo timmer to finish, they they buggerd off!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...