Jump to content
SAU Community

Recommended Posts

I spent my saturday fixing my air con, only to find the relay's are stuffed so even after refitting it all and re-gasing it the compressor wouldnt engage.

Got to love a spare parts collection, finally after 3 years its working properly

I spent my saturday fixing my air con, only to find the relay's are stuffed so even after refitting it all and re-gasing it the compressor wouldnt engage.

Got to love a spare parts collection, finally after 3 years its working properly

thats the one thing im loving about driving my bros are around atm - epic air con

except now i want to fix the 180s air con but have limited $$ ;)

oh and,

good morning!

thats the one thing im loving about driving my bros are around atm - epic air con

except now i want to fix the 180s air con but have limited $$ :P

oh and,

good morning!

I'm loving the air con in the Brabus at the moment.

Doing it without is for suckers :(

hahaha sounds exactlly liek my saturday anna

im burnt where the sunscreen didnt go... :(

ahahahaha I put sunscreen on my truckers arm heading down there, but I made Andy drive on the way home and forgot to do my left arm. It was f**ked by the time we got home :-(

thats the one thing im loving about driving my bros are around atm - epic air con

except now i want to fix the 180s air con but have limited $$ :P

Oh i've gotta do the air con in the syl. When we pulled the old engine out, waz just ripped the hose off letting all the gas out...... now i've gotta have it switched to the new system so that's $200 I wasn't counting on *cries*

Oh i've gotta do the air con in the syl. When we pulled the old engine out, waz just ripped the hose off letting all the gas out...... now i've gotta have it switched to the new system so that's $200 I wasn't counting on *cries*

yeh its not cheap :P

however it is better than sweating it out in the middle of the day.. unless that sweating is with josh, naked

Yeh it does suck a dick. I hate getting in it when it's been sitting in the sun... black car = ass.

He's running, has been for 4 weeks now, no nasty noises (except the VCT upon start up) and he doesn't sound too much like a tractor, exhaust choice is important with sr's, get a shit one and you might as well be hookin around on dad's ride-on :(

Gotta get him tuned though, 4000 rpm limit sucks dick, i'm changing outta 1st when i'm barely off the line :P So when i've got some spare cash (before Drag day) he's going back to EFI :(

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi all, I’ve just finished fitting the timing belt on my RB25, following the standard procedure: rotate the crank twice, release the tensioner, then tighten it down. The belt feels tight, and you can see that clearly in the picture below I’ve heard some people say it’s actually better for the belt to be slightly loose rather than too tight, as excessive tension can lead to snapping. So that’s in the back of my mind. What I’m seeing is this:  • At idle, the belt looks fine.  • But when cranking and especially when revving (around 3–4,000 RPM), there’s a momentary flap/flex or flicker in the belt, which I’ve tried to capture in the video. So my question is — based on what you see, is this slight belt movement something you’d consider normal, or am I just being OCD? Could this amount of movement cause sync issues? Or is it just a harmless bit of flex under load?   from what I know belt flap and flex is expected when crank spins up and pull cam with it Would appreciate any thoughts or similar experiences.     IMG_7656.mov IMG_7657.mov
    • I've replaced the front brakes of my NA to 324 brembos and 350z calipers: i'm going for 225/40-18 up front and 245/35-18 in the back. I have Rays 7.5*19 ET35(225/35) in the front with 5mm spacers otherwise the calipers "lock up/ won't rotate". When i use the calculator i come up with 8*18 ET30 for 225/40...... but not sure i get problems with the calipers. Anyone riding around with 18 inch. that can confirm "that it'll fit"? In the back it's 7.5*9 ET30 (245/30) with the 5mm spacers, but there is no problem with the standard small brakes, so i want to take 8.5*18 ET25 (245/35).
    • Lol.. but then.. always come back to a JDM..
    • Glad to hear. If possible, get your tuner to check air's to make sure everything is still where it should be.
    • The problem with FB/Insta/Reddit etc comments relating to cars is simple. You get to ask a question once, and get one round of replies. For things that can actually be answered in a few lines of text, once, it's fine. After 6 hours, your original question is lost to the void. There are no follow ups, additional questions, anything. No project car is ever such a simple list of questions to ask. You need discussion.
×
×
  • Create New...