Jump to content
SAU Community

Recommended Posts

That sucks hombre! Sounds like an interesting project.

Similar note: The airport now has an actual waiting bay and it's free for 20 min. To prevent people going in and leaving after 15 min and coming straight back, there's a camera that snaps your number plate as you enter. Interesting tech.

sick belly, need to be near amenities, lol.

nerdy stuff is an EtherTen board(arduino variant) setting it up and programming it to be a car counter for a driveway, but will ignore exiting cars, and ignore pedestians, while triggering a PTZ camera to pause its patrol, and swing around to capture the number plate of the entering car.

wait whats this ignore pedestrians so no upskirts pics?

I forgot to say that the counter once up and running, will be viewable from a web browser to see how many cars have entered that day, that year, and how many spaces are left

I forgot to say that the counter once up and running, will be viewable from a web browser to see how many cars have entered that day, that year, and how many spaces are left

Nicely done. Sounds like some nifty engineering ther.

So jelly. I wish my job involved jet setting to Japan and getting to drive sexy JDM cars (she can keep that rental-Yuck!). I'd come back 10kgs heavier from all that awesome Asian food and trying to tell the gate staff that the 34 cat back system I have stuffed down my shirt is actually a very high tech spinal brace.

Thats ok im a great replacement

I dunno if my 34 ('The Ark') would like that very much. There is a single blonde Silvia driver in Victoria ;)

Milk bar is a term in some parts of Australia for suburban local shops or general stores. They are known as tuck shops, delicatessens or delis in South Australia and Western Australia, and as corner stores in Queensland and New South Wales. Milk bars are traditionally a place where people pick up milk and newspapers, and where school children purchase milkshakes or lollies.

Wadyaknow

they also used the term back in the 40-60s in the us, and here for the shops that sold milk shakes.

these were a local hangout/past time for youth.

I have also used the term for local take away shops that sell hamburgers and chips, etc.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...