Jump to content
SAU Community

Recommended Posts

Trying to conjure up more money and yard space, and a shed. And more cars... doesnt seem to be working. Might need to sell some cars first. That will give me space, and money for more cars, but not a shed. Need the shed first.....but need the other two things first to get the shed.....problem

Trying to conjure up more money and yard space, and a shed. And more cars... doesnt seem to be working. Might need to sell some cars first. That will give me space, and money for more cars, but not a shed. Need the shed first.....but need the other two things first to get the shed.....problem

An enigma wrapped in a riddle

my guess is banging someone else.....man cut ties to people like that man its for the best! plenty more fish in the see and a chance to make new friends and changes

aint worth it IMO

Yep plenty of more in the sea

.

I no longer have feelings for you is code for I am either interested in someone else or I am already ducking someone else. Dumping someone by text is mean as.

Yep I totally agree. Breaking up is never easy but doing it by text is a low act. Was more pissed off about getting dumped by text then her actually ending things. But over it now and already chatting to another chick. Gotta get back on the whores

I was dumped by phone when she said she was going to his place that night and would see me in the morning...then she couldn't understand why I fkn yelled at her on the phone. Ah well life is much better now, even with much less seks.

And that's not what we would be watching Chantelle :P

Did she really expect a different response?

You wanna watch Tony soap his balls instead of his butt?

Apparently she did...slarts, who knows what goes on it their heads.

Will be watching Tony soap something entirely different :P

Are you talking about those long hard arms?? Is it obvious that I linger too long when his showering

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...