Jump to content
SAU Community

Recommended Posts

Thanks bunta. That has explained a lot of things :thumbsup: Where can we get a crank trigger from?

Ross make a kit, MSD do, you can get slots machined into your harminic balancer, lots of options! You need a ECU that can accept a crank trigger sensor input, but thats pretty much anything other than a power FC lol

Just got a invite to a meeting, The Director General of the Department, the Executive Directors of the 4 regions in the state....and me, and I have to demonstrate to them why the Ipads are good. Bit of Friday fun :S

Ross make a kit, MSD do, you can get slots machined into your harminic balancer, lots of options! You need a ECU that can accept a crank trigger sensor input, but thats pretty much anything other than a power FC lol

Great. More money to burn..........

So the Ross kit. Need to source an ECU next as now I'm really confused as to what I should go for :/

Just got a invite to a meeting, The Director General of the Department, the Executive Directors of the 4 regions in the state....and me, and I have to demonstrate to them why the Ipads are good. Bit of Friday fun :S

Just make sure there is no pron on the iPad you use as a demonstration :P

Great. More money to burn..........

So the Ross kit. Need to source an ECU next as now I'm really confused as to what I should go for :/

What ever you can get for the best price I reckon, Wolf, Haltech (aside from my personal vendetta) Adaptronic, Vipec, Motec ect are all top line ECUs and will do the job.

Infact Haltech CLAIM that their ECU handles the timing Jitter issue better than the others, and there appears to be some evidence supporting it. Perhaps you could give Haltech a go (cant beleive I said that) on the normal CAS and if you experience an issue go to the crank trigger?

What ever you can get for the best price I reckon, Wolf, Haltech (aside from my personal vendetta) Adaptronic, Vipec, Motec ect are all top line ECUs and will do the job.

Infact Haltech CLAIM that their ECU handles the timing Jitter issue better than the others, and there appears to be some evidence supporting it. Perhaps you could give Haltech a go (cant beleive I said that) on the normal CAS and if you experience an issue go to the crank trigger?

I was thinking of getting a Haltech so that may be one way to do it. I will have a look at their website again and also talk to Hi Torque Performance.

:thanks: 4 d advice mate.

I was thinking of getting a Haltech so that may be one way to do it. I will have a look at their website again and also talk to Hi Torque Performance.

:thanks: 4 d advice mate.

No worries! Mercury are selling Haltechs really cheap at the moment $2000 installed and tuned. I would get it from them, get them to install it, put a base map in it then take it where you please to get tuned.

Edited by Bunta

No worries! Mercury are selling Haltechs really cheap at the moment $2000 installed and tuned. I would get it from them, get them to install it, put a base map in it then take it where you please to get tuned.

Looks like I may be able to procure a brand new Hatech Platinum Pro for less than $1,400.

Anyone want a brand New Apexi PUSSY FC with HC :D ?

Just got a invite to a meeting, The Director General of the Department, the Executive Directors of the 4 regions in the state....and me, and I have to demonstrate to them why the Ipads are good. Bit of Friday fun :S

Oh this is going to be good...Pie charts and bar graphs time, Throw in some user testimonials and crap about % of user uptake.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...