Jump to content
SAU Community

Recommended Posts

they dont mess with you (the pack doesn't state that you shouldnt be operating heavy machinery etc) but if you have stomach issues prolonged/high dosage use can cause stomach ulcers/gas/diarrhea

they make stronger ones, but they are prescription only. see what the doctor suggests you take

will do.

That sucks dude. Kids tend to get priority because they don't stfu when they're sick.

On another note, love how the Simpsons starts on one note and looks like the story is heading one way and ends on a completely different tangent. Yet, it all occurs so effortlessly! Sheer brilliance!

Thanks dude...

Welcome

Get wife to give you awesome massage.

With Happy Ending

its near impossibru to get any massage, let alone an awesome one.

Bribe with money or wine

Two things:

Lots a Beer and music (listening to deadmou5 not exactly live version)

Awesome

DeadMau5 is awesome

So the doc told f all......sen fkn sational!

Name one that isn't a complete f**k tard. 6 years of school to play a guessing game.

Same. I'm getting more and more frequent palpitations. Need to find a good doctor.

alcohol, lack of exercise and junk food is a big cause of that. Key is to do it in moderation and exercise
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...