Jump to content
SAU Community

Recommended Posts

check below is a pic of the engine plate. this is a 2 seater 1988 model. PZ refers to being the 2 seater.

z31 vin number

re the pics of the engine comp, basically if unbolt it off frame of the car (easy should be 2 bolts) then lay it on the carpet, i need close up photos of both sides of all 4 plugs that go into the ECU. just identifies possible problems with my wiring as non of my colour coding matches, and i imagine yours will be the same as mine. email them to me and as hi res as possible would be great!!!!!! hopefully finally get this old dog going properly.

to give you an idea here is my ECU at present....

z31 ecu

and that is 10x better than when i got it. and it at least runs now - sorta...

  • 3 months later...
  • 4 weeks later...
check below is a pic of the engine plate. this is a 2 seater 1988 model. PZ refers to being the 2 seater.

z31 vin number

re the pics of the engine comp, basically if unbolt it off frame of the car (easy should be 2 bolts) then lay it on the carpet, i need close up photos of both sides of all 4 plugs that go into the ECU. just identifies possible problems with my wiring as non of my colour coding matches, and i imagine yours will be the same as mine. email them to me and as hi res as possible would be great!!!!!! hopefully finally get this old dog going properly.

to give you an idea here is my ECU at present....

z31 ecu

and that is 10x better than when i got it. and it at least runs now - sorta...

Hey ! I just came across this conversation while doing some web surfing. . . . I have a 200ZR in Adelaide.

I have had it for quite a while, unregistered and uncomplied. . . . my garage queen. It is a four seater, auto and came to me from a small time car dealer on the north coast of Honshu, Japan - who I buy interesting cars from when he gets them. He told me that they were very rare in Japan even when new.

My issue is compliancing - particularly the rear seat belt mounts. If any owner with a four seater could send me a photo of the rear seat belt set up for Aus I would be very grateful. I was considering removing the rear seats and claiming it as a two seater. I tried sitting in the back yesterday - could only fit if I turned sideways with my head twisted to the right with my chin touching my chest - got no idea why they bothered putting those seats in the back.

Photos on my web site . . . My Webpage

I have seen another 1 in Adelaide at an importers but it was a little rough.

Cheers

Dave

post-35798-1172615081.jpg

Edited by landbridge
  • Like 1
  • 1 month later...

Damn, Ive been on this forum ages and only just noticed this thread.

Ive got an 86 (at least I think it is an 86?) 200zr over here in Perth, had it for a few years now.

Pretty stock except for the following:

-R33 turbo - 10psi

-Pod filter

-SAFC2

-Supra FMIC, 2" stainless piping

-3" inch exhaust from turbo back

-Tein springs, bilstein shocks, drift pineapples

200zrside.JPG

coolerwrap.JPG

driftlook.JPG

She is up for sale very soon though, would have loved to have done an RB25DET conversion.

Edited by 200zRRR
  • 4 weeks later...
  • 5 months later...

^^^ lol at chris!

Yeah I think I own RB20_Zed 's ol car....

currently have a silvertop RB20 sitting in the garage plus some aftermarket ecu and goodies to go in at the same time..... couple of weeks away yet though... then off to the panel shop for some fresh paint .......

  • 2 weeks later...
  • 3 weeks later...
  • 2 months later...
  • 2 months later...

The old beast is finally finished (well 98% anyhow) this is how its stands at the moment...

200zr.jpg

200zr2.jpg

200zr1.jpg

engine.jpg

interior.jpg

struts.jpg

Yet to be dyno tuned, only real engine mods are ported and polish exhaust ports, r33 turbo, walbro 255lph pump, malpassi fuel reg, apexi avc-r and have a NIStune ECU for it also to go in... It feels fairly quick now, quicker than my R32 so at least 150rwkw I would imagine.

  • Like 2
  • 5 years later...

I have a red z31 200zr 2+2 auto and my hubby has a black z31 200zr 2+2 5speed manual.. Bought them both on Ebay a couple of years ago... ADORE THEM.. Different, powerful and a damn sexy looking car... :-)

  • 6 years later...
On 21/08/2006 at 11:41 PM, Stribs said:

Snap.

I looked far and wide for the last of the "true" (straight6) zed also and ended up with this 200ZR 2 seater specimen in 2004.

If I am interpreting the chassis # correctly it was the 36th ever made, all my other cars had many many more clones come before them compared to this one =)

http://skylab.bitstripped.net/gallery/d/1068-2/IMGP1157.JPG

Unfortunately I got run into in march and it's been declared a total loss by the insurance company; Try finding any panels for these beasts from the windscreen back, it's not fun. =(

More pics of my old daily -before- the smash - skylab.bitstripped.net Z31 200ZR

Matt.

Hi mate you might remember I actually have your old 200zr and over 10 years later I've had the time to give her the love required

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...