Jump to content
SAU Community

Recommended Posts

  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

Maybe worth a note - but club entries need to be in by 6th June (2.5 weeks) or they cost $200 a pop.

We need 6 or more cars (each cost $100) and a bit of a think about stand design/theme. Renting a powerpoint is $60.

Maybe some PS2s with GranTurismo and all the Skylines loaded? If we can get enough consoles & TVs - set up iLink races? Just a thought.

I can arrange AV rental :)

Also - despite the uh, badness, that happened to my car - I'm still keen to enter it (as long as we secure our area). Can't be too careful these days.

ok guys

im sorry ive been a bit distracted lately and put this off for a while

im gonna get my act together

and after the show off im really motivated to get a stand up and running for the MAS

i saw the way people looked at skylines at the show off and im sure theyd be even more impressed with what sau has to offer..

i want to call a meeting for tomorrrow night .. get everyone together who wants to have their car in the stand..

we can go over ideas and pick out cars that are worth entering

i dont wanna have the task off rejecting peoples for the stand cause basically we want eye catching cars not stock as rock

so please only enter if u know ur cars got what we need for the stand

is tomorrow to early to call a meeting???

WELL IF EVERYONE COULD CONTACT ALL THE SKYLINE OWNERS THEY KNOW WITH NICE SHOWY CARS TO ATTEND

TOMORROW NIGHT WOULD BE GREAT

THE EARLIER THE BETTER

PROBABLY SOMEWHERE HALF WAY .. SAY IN THE CITY.. OR DONCASTER PANCAKE PARLOUR .. WE COULD GET THE BACK ROOM AND THERES PLENTY OF PARKING..

Although I have plans on Sunday day&night, I guess I'll try to squeeze a couple hours out of the GF time to come to this meeting.

Lets just hope it isn't a case of standing around for a couple hours chinwagging and then nothing happening from it.....

thanks leewah .. appreciated..

im gonna try get together all the info we need to know regarding the MAS

i guess if the weather is crappy

once everyone has turned up we can find a place to sit down and have a small meeting

i need to push at this so everyone gets themselves together and gets their cars ready

so theres no last minute delays

money has to be in my june

i dunno.. far as i know nobody has enough rice to go with their lines to warrant it.. i mean there are plenty of nice ones, but nothing other than the big powered ones. get BIGPSI and things to enter, i think he is still selling his line - its a good place for it.

Here is my nominations anyway:

Steve's old PHAT32 - chase down the new owner from m**r (i think it was somebody from there that bought it) and get 'em to defect..do ur stuff mz defctor

R32pwr - the 396rwkw thing (of course, but i am sure dr_drift will be trying to pull a separate BMT stand)

BIGPSI and his beasty.

Meg's Cefiro (for something different).. although u might have to get it towed there :)

Jamez GTR

Leewahs GTR

R31nismoid and his GTS-R

Possibly Jet's 33 but as long as he ****s off the mechanic's car seat covers and that giant clock on his dash :P

Maybe DJ_lethal's R33 GTS-T ..thats pretty nice.. he's got a bit of rice..gotta get that scratch fixed, blah, blah, but if u hassle his ass he'll go in..

Vickii knows some nice ricey skylines, but i think many of them will be representing other clubs, but can always ask wether they want to front our stand.

what about a representation from the 34 brigade? - namely the ylwgtr and/or the UPI gtr?

IMO a 34 GTR would not need to be riced up at all because they are fairly rare - so a good opportunity for people to actually SEE them up close :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...