Jump to content
SAU Community

Recommended Posts

To put a thumbnail in

Go into add reply

Under the text window there's a button browse. click that, select the pic. hit upload

then go into the manage attachments pull down menu and click add into text editor.

click preview post to see if it worked.

post-2863-1181184400_thumb.jpg here's another one of mine next to a beaten up sil80

To get the picture displayed, you need to upload to an off site server like photobucket and then link to the image.

they don't come from factory with those indicators. When you get your cared complianced in Aus they are supposed to be put in.

I wish i didnt have them, they look like shit.

I might buy some new guards from japan when i get a full respray and not put them in.

To clear the above question regarding the side indicators on R32's it is my understanding that when compliancing these cars it depended on the person compliancing the cars interpretation of the ADR relating to the indicators.

Basically the ADR says that they are only required if at a certain angle the front corner indicator is not visible. But if you look at your front corner indicators they have a bit that protrudes at the edge with a second bulb. This allows the indicator to be seen from a greater angle to the side (and rear) of the car than would be otherwise possible. So some compliers obviously felt this covered the ADR while others were not certain and took the "its better to be safe than sorry" option.

Wow, I never thought I could right so much about something so small..... :D

To clear the above question regarding the side indicators on R32's it is my understanding that when compliancing these cars it depended on the person compliancing the cars interpretation of the ADR relating to the indicators.

Basically the ADR says that they are only required if at a certain angle the front corner indicator is not visible. But if you look at your front corner indicators they have a bit that protrudes at the edge with a second bulb. This allows the indicator to be seen from a greater angle to the side (and rear) of the car than would be otherwise possible. So some compliers obviously felt this covered the ADR while others were not certain and took the "its better to be safe than sorry" option.

Wow, I never thought I could right so much about something so small..... :D

hmmm sounds about right to me really

p.s. yidz are they R34 GTt rims ? they dont look over the top but suit the car nicely,

p.p.s. yes, getting ur front windows will look a LOT better :D

hmmm sounds about right to me really

p.s. yidz are they R34 GTt rims ? they dont look over the top but suit the car nicely,

p.p.s. yes, getting ur front windows will look a LOT better :D

Yep GTT rims :) Theyr a nice cheap rim (even though they were on when I got the car!!) The hardest part is finding centre caps for them. I paid $130 for the 4!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...