Jump to content
SAU Community

Recommended Posts

yeah, you can see it isn't quite long enough in the second photo. Though it lines up with the guard on the top edge really well.

I was originally going to go the full gtr front end but after fitting the panels up i actually like having the gtst bar on there.

Hey Trent! Thanks for putting the pictures up of the car and for your help today, you're a legend - they turned out great!

I'm so happy with these wheels, they're just awesome.

Now to just roll the guards and watch the car drop :)

Cheers,

Steve.

BTW SNISMO i think i'll be keeping the wheels as spares most likely. See what happens.

Cheers for the comments guys :)

Yeah cutting the brackets back has been on the list of to-do's for quite a while now, along with some other shiz to tidy the car up.

I just had a look at your profile to see if you had some more pics of the R in your gallery but you didn't have any.

It looks like you take good photos, you should start one.

Edited by SNISMO

Haha, cheers! The photos were taken by me and a friend on his SLR. Just a bit of mucking around.

Ive got quite a few of the photos from that session, but only a couple turned out good, thats why I havent posted many pics :)

When I get my car back from getting my engine rebuilt, i'll need to organise a time with him to borrow me his cam as I haven't got anything decent.

but yeah... looks hot. White R32 GTR's are the shiz.

:)

Haha, cheers! The photos were taken by me and a friend on his SLR. Just a bit of mucking around.

Ive got quite a few of the photos from that session, but only a couple turned out good, thats why I havent posted many pics :rofl:

When I get my car back from getting my engine rebuilt, i'll need to organise a time with him to borrow me his cam as I haven't got anything decent.

Dude that looks f**king hot

Got more pics?

I reckon to finish it off just add the N1 rear lip :D

^ Haha, white FTW :P

Thanks for that, yeah ive actually been thinking about getting n1 sideskirts, n1 lip and maybe trust rear pods. But I want to keep a clean look too. Bah, can never make up my mind.

Here are a couple more pics :)

I posted this one before quite a while back. Not too sure why it turned out slightly yellowish/reddish though. Also, anybody got any advice on how to capture the carbon weave in the bonnet? Maybe its just the lighting?

dsc0003sui3.jpg

A bit boring:

dsc0020sig7.jpg

dsc0040spi5.jpg

And, just for fun:

32posterwi3.jpg

Edited by Yawn

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...