Jump to content
SAU Community

Recommended Posts

I just bought this setup on the proviso that it fits an r33/rb25det, it does not. The engine mounts fouls the turbo plus the ABS unit when used with the rb20 manifold. It does fit an r32/rb20det though. It is not impossible to get into an r33, just easier for a 32.

I need a turbo as my T28 is blowing smoke at high revs. That is the reason I bought this and the reason I need to sell this kit.

What you get:

* The Turbo: Japan spec. HKS prepped Garrett GT35 Pro, runs ball bearings, must have external wastegate, 0.5 A/R, power range is ~200kW up to ~380kW. I have a spec. sheet for it inc. turbine maps (pressure ratio, corrected air flow). I would recommend a BOV that can handle 1 bar. I would also recommend stuff like a FMIC, ECU + EBC. Forged internals would be good if you want go to 2 bar. Checked by Garrett here, it is in v.good condition.

* The manifold: cast HKS 6 into 3 unit with ext. wastegate port

* The wastegate: HKS unit with spring tension in the 0.8 bar and up class, comes with screamer pipe. From the looks of it, it'll be damn loud.

* The 3" dump: all the way to your cat included

htttp://www.nitroware.net/~tony/gt35_1.jpg

htttp://www.nitroware.net/~tony/gt35_2.jpg

htttp://www.nitroware.net/~tony/gt35_3.jpg

htttp://www.nitroware.net/~tony/gt35_4.jpg

htttp://www.nitroware.net/~tony/gt35_5.jpg

htttp://www.nitroware.net/~tony/gt35_6.jpg

300k@

I'm in the Epping area, I work in Silverwater. I would imagine a visual inspection would confirm the above description.

Please do not PM me, email me instead at [email protected] or call. You know the rough price on this, you also know what it is worth. Looking for $2,200.

Thanks,

Tony 0411 688 312

can i vouch for this.. Tony is a *****, and was scared to shave less than ~5mm off the metal which surrounds the engine mount rubber. it requires very little work to fit a R33. But i have a small idea Tony doesnt want to write off his car as he can barely handle 180rwkw....muaahhaahha jokes..

  • 2 weeks later...
  • 2 months later...

the pics ain't working

and are all these stuff straight bolt on for RB20? don't wanna find out I have to pay another few hundred bucks to get custom things to fit it

and please post up anything else that we may need for this set up

thanks

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...