Jump to content
SAU Community

Recommended Posts

for the wheels... well im looking at the model 5 copies on uniqueautosport website that are $1180 then buying second hand tyres. so they would have to work out less than that cause i prefer the model 5 to vs-5 (or whatever your model is called) even if they are copies.

thats what i was planning to do, by a standard bar and hack into it to fit the fmic. more stealth than the big trust bar.

040 goes in factory location - in tank,

If you are serious about wanting parts, then PM me your offers, but parts wont go cheaply as my preference is to sell the car complete, unless i find a buyer to buy my car less bits.

Thats not to say ill be asking for new part prices, but say i wont accept $500 for rims, of $600 etc for intercooler.

It is a Type S intercooler, from memory 600 x 300 x 60mm (or 76 check their website)

It came with HKS piping and hose/clamps, to look at the material is powder coated mild steel.

As for condition as i run mesh on my front bar it is in great condition, after a quick dip in some caustic to clean it up it would look like new, ie not a bent fin on the cooler, not one!

I dont have an oil/air separator so MAY have a thin film of oil on the inside that will clean up easy with the caustic bath.

Will try to take some more pics over the weekend, including interior, engine bay, suspension etc.

So just to clarify for those people who have sent me PM for parts, there is a couple of people kinda interested in the car with filter, zorst, brakes/susp.

If they take it off my hands then i will then be selling the IC, AVC-R, Power FC, oil cooler, Bosch Fuel pump etc AFTER the car is sold.

As i have explained to people i dont want to sell off good bits and be left with stocka that i have to drive every day, or no one wants, so have to sell cheaply like Chef _32's friend.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...