Jump to content
SAU Community

Recommended Posts

no you wont get charged a toll, but youd want to, because the camera near the gatehouse gets your plate, and you get a nice lil fine afterwards

apparently they dont have the authority to issue payment letters yet, this from "reliable" source

i don't believe it though...

Link to comment
https://www.sau.com.au/forums/topic/122480-m7-rumours/#findComment-2262821
Share on other sites

i went through without a tag about 4 weeks ago and can confirm i got a bill for the toll plus $10 admin for each occurance.

hmm wonder what happened to mine then ..

i wonder what the angle is and wether they take the back or front of the car..

Link to comment
https://www.sau.com.au/forums/topic/122480-m7-rumours/#findComment-2263575
Share on other sites

There are no speed cameras on the M7, but *apparently* they CAN book you for speeding using basic maths:

Speed = Distance over Time.

Seeing as they have the toll plazas and cameras to match your plates to your e-tag (or to scan your plates and send you the bill if you don't have an e-tag) to figure out how much to charge you for the amount of the motorway you've actually used, they can easily figure how long it took you to get between any two (or more) toll plazas along the way.

And *apparently* they don't have to put signs up stating that there are speed cameras there, because there are no speed cameras as such...

Link to comment
https://www.sau.com.au/forums/topic/122480-m7-rumours/#findComment-2263704
Share on other sites

ive been charged the toll plus 10 as well, letter came approx a month after i used it.

since then i have not paid for at least 2 months, cant find the letter (somewhere in the mess on my desk) and so now am hoping they will just let me off without paying since no reminder has been issued so far :yes:

(i doubt it though!)

Link to comment
https://www.sau.com.au/forums/topic/122480-m7-rumours/#findComment-2263717
Share on other sites

There are no speed cameras on the M7, but *apparently* they CAN book you for speeding using basic maths:

Speed = Distance over Time.

Seeing as they have the toll plazas and cameras to match your plates to your e-tag (or to scan your plates and send you the bill if you don't have an e-tag) to figure out how much to charge you for the amount of the motorway you've actually used, they can easily figure how long it took you to get between any two (or more) toll plazas along the way.

And *apparently* they don't have to put signs up stating that there are speed cameras there, because there are no speed cameras as such...

no legislation exists in nsw to book people for a point to point speeding untill then your safe

cameras are going in very soon they were always planned

Link to comment
https://www.sau.com.au/forums/topic/122480-m7-rumours/#findComment-2268037
Share on other sites

There are no speed cameras on the M7, but *apparently* they CAN book you for speeding using basic maths:

Speed = Distance over Time.

Seeing as they have the toll plazas and cameras to match your plates to your e-tag (or to scan your plates and send you the bill if you don't have an e-tag) to figure out how much to charge you for the amount of the motorway you've actually used, they can easily figure how long it took you to get between any two (or more) toll plazas along the way.

And *apparently* they don't have to put signs up stating that there are speed cameras there, because there are no speed cameras as such...

Ya, as fatz said, no such thing yet... Think I got my info from the M7 website... www.roam.com.au

Link to comment
https://www.sau.com.au/forums/topic/122480-m7-rumours/#findComment-2272661
Share on other sites

Any truth to the following?

There are no fixed speed cameras on the M7.

You dont get charged a toll at all, if you dont have a tag.

that was true about the m2 up untill a few months ago, they admitted it on the news after they fixed the cameras. I went thru heaps of times before I got an etag and never got fined

Link to comment
https://www.sau.com.au/forums/topic/122480-m7-rumours/#findComment-2272729
Share on other sites

no legislation exists in nsw to book people for a point to point speeding untill then your safe

cameras are going in very soon they were always planned

I've averaged more than 100km/hr on the M7 a couple of times, and my letterbox has been clear.

If they have to advertise those Safe-T-Cams for trucks (which calculate average speed) then I can't see why they don't have to advertise it for passenger cars.

How many big accidents have there been on the M7? NSW legislation states that the authorities are only allowed to set up fixed speed cameras in known blind spots (I realise this didn't stop them with the Cross City Tunnel, but then again no-one drives through there anyway).

I don't want to be the guinea pig for it, but if I got picked up by a speed camera on the M7 or Cross City Tunnel I'd take it to court, claim they were installed illegally (due to the lack of "black spot" status) so the evidence isn't admissible in court. The burden of proof is on the prosecution, and so I'd like them to supply proof of my speeding without those photos.

And its not like the courts have any love of speed cameras - they've let quite a few people off because of that "checksum code on each photo being wrong" thing that was in the papers a few months ago, as well as when the Harbour Tunnel first opened and the speed cameras installed weren't an approved brand so those fines were overturned. With no other proof aside from evidence that is inadmissible, the defendants have generally won.

Link to comment
https://www.sau.com.au/forums/topic/122480-m7-rumours/#findComment-2272871
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...