Jump to content
SAU Community

Recommended Posts

I'll be working for the SEC on Saturday, and I've still no idea who im voting for. I think my district is a safe liberal seat anyway so it shouldnt make a difference. Both parties are gimps and out to rape us.... But Brogden looks like he'd drive a faster car... can anyone confirm that Bob Carr dosent drive at all ??

Bob Carr does not hold a drivers' license. Carl Scully utilises the services of a state awarded chauffeur.

These are the butt nuggets making up the road rules. I'm doing a donkey vote... I could care less who comes into power...

You have to say to them "what have you done for me lately?"

I'm in a safe Liberal seat and Bob Carr will sweep it in anyway.

T.

Bob Carr will definitely NOT be getting my vote- that bloke is such a hypocrite on so many levels.....

My pipe dream? For the 2007 elections, we stand a motorist's action party to give this clown (who thinks speed cameras are a great way to make up for his cost cutting on health and education) a run for his money.

I'll get back in my box now!

Kel

If any of you vote for Bob Carr, you had better NEVER speak out and complain about road rules, speed cameras or police harassment at defect stations EVER AGAIN.

mad.gif

Originally posted by Merli

If any of you vote for Bob Carr, you had better NEVER speak out and complain about road rules, speed cameras or police harassment at defect stations EVER AGAIN.

mad.gif

:werd:

If any of you vote for Bob Carr, you had better NEVER speak out and complain about road rules, speed cameras or police harassment at defect stations EVER AGAIN.

and who says that brogden is gonna do anything about it? With the amount he's promising, the money is gonna come from public sector cuts, (partly to fund extra public sector jobs?!?!) and from state revenue such as speed cameras, fines, defects etc.

not showing any particular allegiance, i just doubt the liberals approach. too much promised. i just smell a case of over-promising under-delivering.

I think that if someone "donkey's" or abstains, THEY have no right to complain about anything the govt is doing cos they haven't even tried to change something they don't like.

i honestly think that the liberals cant do any better i think they would be worse...

i dont think NSW has been in better shape as a state then any other time, yeah so he has done some things wrong but he has done a lot of good things too, i would rather him stay on then see the liberals win, they seem to have no idea what they are doing they are always having trouble with leadership crap in their own group so how can you trust them to lead the state??

Because I said I wouldn't vote for Bob Carr, you assume that I'd vote Liberal?

There are more than two parties out there people, there aren't just two choices you know?

Problem is, most people think there are only two choices, so they either vote for one or the other, and the other parties never get a chance.

Just make sure you vote for the party that is going to look after YOUR area....

(for those outside Sydney).....

the Green's have a "Interesting Slogan" "vote for greens, is a vote for NO WAR".... a little late guy's.....

To tell you the honest truth, i think both side are making the same promisies.... funny how most promises go out the window once elected....

as for who get's my vote..... it aint broke so why fix it.....

(spoken and authorsed by Loz for the non donkey vote party Central Coast)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...