Jump to content
SAU Community

Recommended Posts

I'm sure i've seen the car that crashed before, I remember those old volk(?) style wheels and the little fog lamps. Maybe on the for sale sections here, or prestige motorsport? Oh well its just another horrible loss of life, with no winners. Someones wife/daughter/mother wont ever come home, and we import drivers will no doubt cop it hard.

Slow down guys...................

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

very sad news, my condolences to the family.

I saw Ch 10 NEWS it was on there. One question that i have is why the hell do the media in accident coverage refer to particullar models when they are performance cars (eg: Skyline GTR, Subaru WRX) but if it was a FALCODORRE they never say a thing about the model ?

This stupid news coverage makes all performance car owners look like idiots and a general mentallity of the public thinking that performance car owners are bassically murder's.

Everyone take care and think twice before planting that accelerator. The future of performance cars is in each and every ones hands do the right thing for everyone and save it for the track.

guys nowhere has it said the driver was speeding or even at fault... you are all just as bad as the media by jumping to the conclusion that they were driving dangerously... would you have made that assumption if it was a Falcon!?

hold off on your judgements until you have the facts

From what i know the driver was driving at the speed limit.

The mother and child began to cross the road as he approached, when they saw each other the driver swerved away and unfortunately the woman and child headed for the same direction as the car.

Its a tragedy to see this happen; my sympathies go out to the families.

BTW - to all those passing early judgement, please hold off and gather all the facts before labelling ppl. Accidents are sometimes just that - accidents.

Edited by Phantom32

Just saw the story on channel 10 news.

The pedestrians were crossing the road outside Sunshine hospital where there is apparently a lack of traffic lights and people risk their lives crossing Furlong Road.

Driver was released without charge.

By the looks of it, this is as much the fault of VicRoads as it is the driver. They are considering the installation now.

My condolences to the pedestrians and all those affected by this accident.

Just be careful out there and be aware of your surroundings coz people do try to run across the road when they can.

From what i know the driver was driving at the speed limit.

The mother and child began to cross the road as he approached, when they saw each other the driver swerved away and unfortunately the woman and child headed for the same direction as the car.

Its a tragedy to see this happen; my sympathies go out to the families.

BTW - to all those passing early judgement, please hold off and gather all the facts before labelling ppl. Accidents are sometimes just that - accidents.

Please note that thr driver was found not at fault by police, and released. That much is confirmed. The above information is correct to the best of my knowledge and yes, they were crossing in an area without a proper crosswalk.

NickR33: At no stage did i lay blame or say speeding was a factor. i quite clearly stated that when you drive save the stupid stuff for the track. maybe you just read it wrong. so hold off your judgment untill you decide to think.

To all those dickheads blaming and calling the driver an idiot, i happen to be the brother of the driver.

he blow nothing on his BAC test, and was not charged with culpable by police.

the story is that he was on the right lane and the two pedestrians started to cross the road, so he moved to the left to miss them but they then went back to the left, most probably in fear and he hit them. his window was then shattered and could not see where he was going, and went onto the other side of the road. there is no crossing present, and the accident was just waiting to happen.

before u start calling the driver an idiot, put yourself in his shoes and imagine the guilt he has to live with for the rest of his life. killing a mother of 7, one of which happens to be a 2 month old baby.

just because the badge on the car says GTR or skyline, doesnt necesarily mean he was speeding. use your brains, its people with comments like that, that create a negative view on modified car owners by the media and public.

To all those dickheads blaming and calling the driver an idiot, i happen to be the brother of the driver.

before u start calling the driver an idiot, put yourself in his shoes and imagine the guilt he has to live with for the rest of his life. killing a mother of 7, one of which happens to be a 2 month old baby.

just because the badge on the car says GTR or skyline, doesnt necesarily mean he was speeding. use your brains, its people with comments like that, that create a negative view on modified car owners by the media and public.

Really sorry to hear its your brother. I couldnt imagine how I would cope if it were my brother.

I wouldnt post up his version of events in a situation though like this on an internet forum incase something more comes of the case. Just trying to think of your family. I would take the details bit out (which I havent quoted).

on a slightly different note,

we had a school boy hit and killed by a bus on thursday. he hopped off the bus and then stepped in front of it as it pulled away.

in this case the fault lies with both driver and pedestrian. the bus driver thought the kid had gone to the back of the bus, and didn't pay enough attention (driver aged 73), and the kid walked out in front of it.

it was the drivers second accident in less than a week. earlier in the week he had pulled out on the highway into the path of an oncoming 4wd. after the accident on thursday he was major shock, and is still in a bad way. as bad as it sounds, i think there is a good chance the driver will now take his own life.

Sheez bud - hows ur brother doing? He must be very traumatized by the whole incident - hopefully hes on the way to recovering from it.

The problem here, as we now know, is that the goverment and vicroads were playing "pass the responsibility" - no one wanted to install the lights. It takes a death or 2 for them to realise that "oh...maybe we do need one. Let us decide over a fancy dinner meeting". Idiots. Because of that, everyone see the news, sees an import and then they think "oh....look, a fast car! looks like a gtr - must have been speeding". Its also said, that the government had something like $10 million to install new crossing lights or something (unless i heard wrong) - why it hasnt been used i dunno.

A woman and her 12 yo daughter were struck and killed by a Skyline (probably GT-R) overnight in Melbourne. There was a considerable amount of damage to the Skyline, so I suspect the driver was hoofing it.

I truly hope it was not one of ours.

i feel very sorry for the family and every one involved but i just want to know why the first thread implied probably a gtr wat the f**k does the fact it was a gtr have to do with shit :D

i feel very sorry for the family and every one involved but i just want to know why the first thread implied probably a gtr wat the f**k does the fact it was a gtr have to do with shit :D

I think the person who posted that, saw from the pictures that the car looked very much like a gtr.

I think the person who posted that, saw from the pictures that the car looked very much like a gtr.

in that case its ok its just the way he put it (probably a gtr) thats all it just wasnt an appropriate way to say it but ill except that cheers emsta

I also live nearby that hospital and agree that its needed a set of lights there for a long time. Visited people there myself and its a no brainer to put a set in there.

The reason is that the hospital has its own parking for x amount per hour. But there is somebody, who (privately) owns a large piece of gravelled land across the road who also does parking for a fraction of the cost of the hospital, hence a lot of people choose to save there coin and park across the road instead and then walk across. Its a common sight to see families, old people, children etc skooting across the road there.

Couldnt even begin to imagine what the driver is feeling right now. May the deceased rest in peace.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...