Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

The only reason we went is because Dads best mate raced a Lotus and gave dad free tickets, tight arse!!:P haha

Is this old raceway near houses? i.e. a group of loud pocket bikes would be easily spotted/heard? :O

you wont see anything liz. it's gone now. all you will see is some low cost housing. best bet is to google amaroo park or amaroo raceway for some pics.

nothing like a visit to some low cost housing to brighten up your day.

perhaps a visit to catalina.. or is that so closed off you can't even view it??

meh too hard anyway! lol

Dog Park? Sweet I am going to take Zed and Zilla for a thrash :spank:

I was actually at Amaroo the other day, some of the pit sheds are still there. THe whole track is goooooone though :)

Lots of disappeared tracks in NSW....Amaroo, Catalina Park, Warrick Farm, Mount Druitt, there was even a concrete banked speedway at Maroubra once :D

Don't miss Oran Park, it will be a memory in the near future, all we will have in Sydney will be Eastern Creek (ugh miles wide and boring) and Tony Cockhead's v8 Homebush street circuit once a year.

let's all move to somewhere in europe. plenty of hot tracks, weekend trips to the nurburgring... mmm burger ring.

or maybe japan? we could have SAU JP track days at Tsukuba.

Wheels or Motor magazine did an article about all the old lost tracks a while back, and Catalina was included. It's sad to hear that Sydney's motorsport heritage is being lost like this.

I remember going out Windsor/Rouse Hill way once and seeing the signs to Amaroo Park raceway, and spinning out because I'd seen races on TV there, but never actually knew where it was located.

I raced at Catalina and Amaroo before they were closed down.

There is also a banked oval at Pitt town (near richmond) that is/was owned by Ferrordo brake pads. It would be ok for a single car or go-karts.

I also went to the public rallies to try to save Amaroo. They sold land to home owners who complained about the noise. bloody snapper head do gooders. Ruined a fun track and the only motorkhana park with oiled dirt in sydney.

There was a track in mount druitt?? where??

Whalan reserve used to be a race track man!

Named after James Whalan who, in 1821, received a grant of 300 Acres from Governor Macquarie. James was the son of Sgt Charles Whalan, who arrived as a convict. It is thought that the Whalan’s rank among the earliest pioneering families in the Colony.

Did you know that Whalan Reserve was formerly a 2 and 1/4 mile racing circuit used by the great Jack Brabham? The site was originally used by the RAAF as an airstrip but was abandoned after the war in favour of the Richmond base. In 1948, it was converted into a speed circuit. Over the next 5 years there were many meetings held at the track, some of which attracted crowds of over 15,000 people.

I don't mind EC, but I look at the track and I just think its a wasted opportunity.

The NSW government had a chance to build a proper international-grade racetrack, and they built something that's half way between a go-kart track and a real race track.

Its in better condition than the "old" tracks like Wakefield or Oran Park, but there's a few spots where there's not enough run-off and its too wide for the low speeds you carry.

If more of the corners were as high speed as Turn 1 it'd be lots of fun. I should be doing most of the track in 4th and 5th (with occasional forays into 6th) instead of using 3rd-4th most of the time, and having to decide whether to slow down and use 2nd or have the revs drop in 3rd occasionally.

O Whalan reserve was a race track nice reminds me there is a gokart track or somethink (took my 180 around it a couple of times only just fit) out past the football and cricket fields at Whalan reserve which would make a good pocket bike track. The surfuce was ok and was a tight little gokart track.

P.S i think i need to buy a pocket bike to join in the fun :P

:PBJ: :PBJ: :PBJ: :PBJ: :PBJ:

I was talking to a courier driver mate today (does the mountains run also) and he lives about 2 streets from this old track, said he used to go and watch the time attack racing they had their years ago when he was a kid.

Catalina is super narrow for the most part & boardered almost the hole way in timber planking, making it quite unlike other Sydney area tracks. Just after the hairpin in the pics there is a section of tar that has fallen away. When I was up there the gates were open... should have ducked in for a lap :D

The old Maroubra track (Olympia Speedway) was bloody dangerous & took a few lives in the short amount of time it was used. One of the victims was Phil Garlick who has a bust of himself in a race car as his grave stone in Bondi. I've got some historic pics of that track if anyone's interested.

Edited by cul202

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...