Jump to content
SAU Community

Recommended Posts

Didnt get much back from another post.....need some advice

All the mods i have (and plan to keep it that way) on my car are a Apexi pod with cold air intake and full 3" Blitz exhaust with slpit dump/front pipe. i want to extract the best performance out of what i have as i dont plan to boost it.

Would a Apexi AFC Neo do the job, or should a just go for the Power FC?

Not sure because i only have minor mods, and most people who buy the PFC have boost, fmic etc....

Any feeback and opinions are appreciated.

Link to comment
https://www.sau.com.au/forums/topic/123366-power-fc-or-afc-neo/
Share on other sites

id go for the PFC with a boost kit just in case you get excited you can up the boost, maybe try and buy one used.

At the moment i have an Avc-r and im happy but i have a PFC waiting to get installed hopefuly next week, ill let you know how it goes.

cheers

steve

Edited by Tough R34

Akeenan - dont want to turn up the boost because im pretty happy the way everything is at the moment. My thoughts are basically; the more boost, the more problems. I think a PFC or SAFC would give it the little extra performance, mixture, fuel consumption etc...

Steve - Be sure to let me know how you go with the PFC, what changes/differences you feel

Dop3y - What kind of results did the car get? higher Kw?

Edited by PAV34
We go from the otherside.

What is he going to get from a PowerFC, with his mods... that can justify the extra $500-$600?

There is no boosting, no I/C upgrade, essentially its a stock car save for en exhaust

I agree. Even boosting to the capabilities of the stock turbo you won't NEED a power fc.

But if you think you might want to mod down the track (and you probably will want to! lol), perhaps a turbo upgrade.. might be best off sending the money now on an engine management system... you'll get a little more power and a little more fuel effciency in your current set up.

I really don't think you need either though, you'll get the most out of your stock car if you get that exhaust, high flow cat and really open her up!

i believe he stated on his initial post that he already has a full exhaust...

anyway, with just those basic mods u have, a afc neo will do fine! the cost difference of a powerfc and tuning it doesnt seem worth it.

powerfc $1000 + install & tune $500 = $1500

afc neo $500 + install & tune $100 = $600

$900 difference for say a max of 5-10hp gain? u decide if its worth it..

plus afc neo looks damn sexy with the colour screen! i have one myself :D

i believe he stated on his initial post that he already has a full exhaust...

anyway, with just those basic mods u have, a afc neo will do fine! the cost difference of a powerfc and tuning it doesnt seem worth it.

powerfc $1000 + install & tune $500 = $1500

afc neo $500 + install & tune $100 = $600

$900 difference for say a max of 5-10hp gain? u decide if its worth it..

plus afc neo looks damn sexy with the colour screen! i have one myself :D

I personally doubt weather there will be any gains with his mods and no boost, probably not even a smother power delivery. Timing will be pretty spot on std and the safc will do just as good a job of controlling fuel at those airfow levels, pfc is overkill hands down! the only time the pfc starts to make gains is when the safc starts runing out of resolution(if thats the best word to discribe it, cant be bothered typing a in depth decription) and the std ecu starts taking over playing with the timing and fuel (r&r). my guess is the pfc would start to be worthwile/show gains above the 200rwkw mark

i know when everybody gets there first 'line (ive had mine for 3 months) they say there "happy just the way it is", and then a few weeks later they start modding flat out, but im genuinly happy the way it is, but a 'smoother power delivery' is spot on in what i want to acheive, also with a little gain in power. its a bit laggy, gets about 400km to the tank and i think the piggy back or pfc will help with these issues. true?

I got 170rwkw with the current mods by the way.

i believe he stated on his initial post that he already has a full exhaust...

oops sorry, I mis-read it!

sounds like you know what you are doing PAV just a bit of food for thought... i pretty much have a stock car... and the power delivery is second to none.. it's just been set up really well. Ignition timing advanced, fmic, boost controller, high flow cat and 3inch cat back... had a split dump pipe bu the quality wasn't the best so I put a stock dump pipe back on and it is really running perfectly.. couldn't ask for better!

Anyhow, you sound like you know what you are doing, good luck with it!

Liz.

Got any pics of the new Neo tuyen?

The computer generated ones they use for marketing are pretty useless for working out how big the thing is :)

yeh just took some then in comparsion to safc2 :P

neo.JPG

neo2.JPG

sorry for whoring your thread PAV34.

ive driven stock r34 gtt and id say getting a powerfc wont make power delivery any smoother. Trust me they are damn smooth already! (try driving r32 with rb20det haha)

The main difference with powerfc to afc neo is that pfc can adjust ignition timing as well adjusting airflow for fuel while afc neo can only do fuel. While running stock boost, adjusting ignition is not needed. But adjusting airflow would help (a bit more power = a bit more smoother?) as u have an airfilter and full turbo back exhaust which would usually cause it run a tad rich..

400km a tank is decent.. u should look into replacing the o2 sensor of the car if you havnt already. Should be replacing them every 40,000km apparently in the skyline manual.

good luck :)

thanks for the comparison of the 2 afc tuyen, any major differences, pros and cons of the 2 items?? how much did you pick up the neo for?

btw forgot to mention i have a high flow cat....i know that problaly doesnt make a dif..

Edited by PAV34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m here solo don’t have any hands to help so haven’t hit it with a timing light 
    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
×
×
  • Create New...