Jump to content
SAU Community

Recommended Posts

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

reading this wants me to put a 26 in, just bringing up the old thread. just wondering whats the cost of getting to engine in??

ALOT.

You need to be handy with a Tig welder and air hacksaw as well just to mod the sump. Then youll want to freshen up the motor, need a 25 gearbox, a decent clutch, custom tail shaft, new cooler piping, etc, etc, etc. Also if you cant do it yourself (or have good mates) the labour is going to kill you as well.

Steve

As i have mentioned a few times i have kept the rb20 gearbox and im not having any problems as of yet. You will need a much better clutch though. dunno about the custom tailshaft. i kept my gtst one. What also make sit expensive is you start to think "While im at it" then you start doin computer upgrade etc. etc. I put aside $7000 for the conversion but spent closer to $9000

If i had a re-do i would have used an rb25 and spent the extra cash on a better turbo

I went for a 34 gt-t box and hks twin plate. Being a bigger box the shaft had to be shortened. I also went for a pair of 2530s, and a powerfc, as well as afm upgrades, nismo injectors, etc. Total cost has blown well out now but :domokun:

Im making about 310 rwhp at the moment. stock turbos running 11 pound i think. Its gotta go for another tune yet though hopefully get some more out of it.

masters where you talking 300hp or 300kw?

Awesome. Should be a unique ride. Is it gonna be a sleeper or are you doing it up?

what ecu you gonna run?

It will be set up for track work .. Ordered PFC D jetro

Flash89 you can make a comfortable 300 on the stock GTR turbos. Id recomend you just get a RB25 if your on a budget.

DISTURBD you going big single?

No big single , after doing the Dutton with the 25neo 31 we decided we needed that little bit of xtra grunt so building whole new car for next yr

  • 2 weeks later...

Dont need to do steering rack, im just fussy.

Dude, there is enuf info in this topic to write an essay on the conversion. Read up, get some serious cash together, and get on it.

If its too much, RB25's are cheap, put one of those in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
    • House of Fatz dry dock needs a clean sadly one of the long time stables is leaving this weekend   see ya mr purple
    • Hence why I've only modified my car into a pure daily. Everything has to remain reliable & roadworthy, while providing value and grin factor. It also must not be handcrafted to the extent that the car will be immovable if something breaks because you cannot get or make a replacement to at least limp around with.
×
×
  • Create New...