Jump to content
SAU Community

Recommended Posts

did R33 GTR's just suddenly get cheaper?

i remember they used to be up in the 35+k zone, and while looking on jspec and imports 101 for a car for a mate, we saw 3 R33 GTR's for $25-27,000

one white, one black, and one (my favourite) midnight purple..

admittedly they are somewhat stock, but id rather a nice midnight purple GTR, than my GTS-T.

especially seeing as the money im just about to spend on it getting it the colour, and power i want, i wont see back., and the GTR already has that stuff, and same price.

or perhaps the GTR's im looking at are duds?

some feedback would be great, because ive got this money to drop into my gts-t, but if these gtrs are the real deal, for 26k ill snap one up.

Link to comment
https://www.sau.com.au/forums/topic/123867-r33-gtrs/
Share on other sites

did an insurance quote for a $28,000 R33 GTR with minimal mods (exhaust, pods, etc)

ITS CHEAPER TO INSURE A R33 GTR, THAN MY MODDED R33 GTS-T!!!

albeit my gts-t is approx 280rwhp, i thought a gtr which is worth a good $10,000 more, and almost similar power would be more?!

looks like its 33 GTR time people!

Link to comment
https://www.sau.com.au/forums/topic/123867-r33-gtrs/#findComment-2289712
Share on other sites

i dont expect it to be grade 5, nor do i expect low km's, lods of mods, etc..

but these ones seem to be in decent condition

one im looking at is dead stock, rims, exhaust, suspension, everything.

has done about 100,000km, and has some scratches on the front bar, so it doesnt seem that bad for $27,000.

Link to comment
https://www.sau.com.au/forums/topic/123867-r33-gtrs/#findComment-2289844
Share on other sites

looks like its 33 GTR time people!

only problem with this is no one will buy your gtst ! unless you want to drop 10k off it it seems....

also in my searching im starting to agree with IMACUL8

like you can get a 95-96 gtr vspec for 28k

but you can also pay 36k for the same vehical , there is a reason for that .

im starting to think it would be wiser to come in at the top end of the scale and pay 30k top level great condition 32gtr than a average 33

Link to comment
https://www.sau.com.au/forums/topic/123867-r33-gtrs/#findComment-2289980
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
×
×
  • Create New...