Jump to content
SAU Community

Recommended Posts

  • Replies 128
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I dove around for a year and a half with no rego sticker aaaaaaaaaaaaaaaaaaaages ago in an old beatup KE70 corolla, as long as you dont do anything stupid cops leave ya alone.

ALTHOUGH I do NOT endorse this as with no rego you have no CTP which protects everyone's medical bills in the event of an accident.

Well i cracked my windscreen, hgad to get a second hand one. am waiting on a sticker from the dept of transport... lol worked for me. i was shitting my pants the whole time, though... that was me sitting in a metallic hot pink cressida, (for my fiance) looking like a homo. Fantastic. They just said ok and let me go. i was pulled over at an RBT, and they didnt check the plates... since that day, ive never driven an unregistered car. too scary.

Cant wait to see some pics of it in the sun!

PS if you find the fuel consumption a bit much, ill swap my 25DET for the 26DETT... ill pay for postage too... :-)

What's the go with the number plates? If it has not been complied yet it can't be registered...

Looking vey nice by the way!

yea it was my younger bro's isea to put on the old plates of his. SSSHHH!!!!!! Although the car for registered for 2 days i bought a temp rego for it but want to save of the hassle being pulled over by the cops.

Ska what kinsd of bumper you've got? Also fuel consumption are pretty thirsty if you tharsh it its like me in the onld days guzzling beer!! >_< . Thats why as soon as i found out from Racepace that Power Fc can save fuel i when and bought one in the group buy. so...

BTW took the car in to kamikaze today for compliance. They will start the process on monday and it will take 2 wks then rego. Will keep you guys posted

Mate I just have the ugly stocker S1 bar, as seen here:

http://stagea.st.funpic.org/080305.html

I am pretty sure you dont want to swap you're beautiful bar for a stocker >_<

i will be nuts if i did :sick:

just went and saw my car today at the compliance place today. they told me that its goin to be a delay for about a week for it to be complieed since im the first of its kind that they are doing it. They need to confirm a few things with the engineers. so will let you guys know again next week

BTW there was a white DAYZ and a silver rs4 in their workshop wonder whose is it? anybody got an ideaa?

I drove past kamikaze motors today yudy and i saw your car parked outside, i was going to park my car and go up and have a closer look but i had a few things i needed to get done, let me know when you pick your car up and ill see if i can meet you there,

so we can meet in person

Simon

I drove past kamikaze motors today yudy and i saw your car parked outside, i was going to park my car and go up and have a closer look but i had a few things i needed to get done, let me know when you pick your car up and ill see if i can meet you there,

so we can meet in person

Simon

Sure FLY not a problem. I told them i want to pick up the car on a thursday(not this coming thursday but the next want). So i have time to bring it to a mech to check the whole car.

Alex you want to come as well?

Yudy,

would be careful making statements about them ripping you off on a public forum I am sure that someone from there would most likely post on here and word could get back to them and if they still have your car its a bit risky. Also I am sure the fuel tank in the Stagea is different to the GTR so the filter is different and the sump on the stagea is different which brad has mentioned Before during his GTR engine conversion so the oil filter probably is different and if they require genuine parts this may be added cost.

I dont agree with them not giving you a discount for providing your own fluids though but if you said that they were doing this one below cost then maybe thats why they wont move on price. Bear in mind that if it is indeed the first car that they have done they may need to consult the engineers more than they will need to for future cars so this consult is not free engineers charge like wounded bulls so this could be where the added costs come from.

When you signed an agreement with them did you have to fill in a form to agree to them complying your car? I did and it says clearly on the form the price and that there is no discount and that if there is any additiional parts required other than the parts used normally to comply a stock car then I pay for them. I agreed to that and if there is an added cost I need to wear it

My 2c

Flysly I agree with you about price most companies that do both compliance and sell cars are more expensive as they would rather keep the plates for their own stock more money to be made there as the profit margins for compliance are lower than a car quite obviously.

Wildcat found this out the hard way with the guys in Perth who complied her car they took way longer than they should have and were very pricey time delays most likely related to the fact that they have lots of new stock arriving for their yards all the time and these cars are more important to them. I am sure kamikaze is the same and put their own cars first.

You never can tell if someone is Bullshitting you but personally if I have a bad experience with a company I wouldnt be bagging them until I had my car back as you never know how spiteful some people can be and I am pretty sure there is no warranty on complaince work someone correct me if I am wrong.

After you have your car back definately tell everyone about your bad experience and dont go back there but not until then.

good idea mcnamg well to tell you the truth i didnt sign any paper works at all. i was just being told to go drop it off at the compliance and thats it, when i got there i ask them wheter i need to fill out any paperworks?! there said no need and that was it.

Ohh well i guess im just so pissed off thats all cant get a straight answer. I guess im already too far in it already and have to go through it and get my car out from there.

3post-27949-1152279760.jpg

heheh those plates are cool, even if they are temporary... すき in japanese (su.ki), naturally, it sounds like 'ski'... it means 'like', as in ' i like this car!!!' yatta! :P

Edited by imaspy

My complaince workshop faxed me a service agreement with some dotars paperwork and asked me to signe them and send them back they basically tell me that if the car is found to be not suitable for complaince that they are required to send the car back to japan or destroy it at my cost and what those costs are. Also tells me what the go is with regards to needing to provide evidence that the car has been deregistered and degassed and that I have to pay to have it regassed and any additional costs involved with returning the car to stock are mine

heheh those plates are cool, even if they are temporary... すき in japanese (su.ki), naturally, it sounds like 'ski'... it means 'like', as in ' like like this car!!!' yatta! :P

cool what a coencidence!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...