Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just wondering which oil is better for my R32GTR. Motul 300v Chrono 10w40 or the 4100 turbolight. My cars only mods are exhaust and coilover suspension and will stay this way for a while and running stock boost. Any info would be appreciated. Thanks.

300V is great oil but probably overkill on a street car (others would beg to differ :dry:)

4100 is only a semi-synthetic, which means it's about 15% synthetic and 85% dino juice.

I would go for the Motul 8100 5W-40 myself, either that or the 300V and do an oil analysis at 5000km to find out what it's like. You would probably find the 300V will last for extended oil change intervals if you're not being hard on it (track work).

For what it's worth, I've read that the 4100 is better for the older motors. It was something about the detergents in the full synthetics cleaning too much of the gunk accumulated in the bores and suffering blow-by as a result.

Also:

http://www.skylinesaustralia.com/forums/in...showtopic=22458

:D

Considering you have a stock motor, you might aswell go between the two products. The 8100 would do a good job. 300V is overkill and the 4100 is nothing out of the ordinary.

cowie165, thats an old wives tale. Its like saying you should warm your car up for 10 minutes each morning.

i've been using the motul 4100 10w40 for a while, no complaints here. Though i'm thinking of moving to a higher weight 10w50 or something, so might give mobil1 a shot.

hard to compare 4100 to 300v chrono, because the 300v is more than double the price or something...

I found this link ...Although it dosent relate totaly to motul its very interesting the differences between the ratings ...

Maybe we all should be running Diesel Synthets :)

http://motorcycleinfo.calsci.com/Oils1.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...