Jump to content
SAU Community

Recommended Posts

hey all, purchased an r32 gtr last night through prestige and have been told due to new car shipments it could miss the boat coming into perth and take up to 4 months, so it has been sudjested to go to sydney and have it complied then bring it back via road train, just wondering if anyone else importing into perth has heard anything like this, and lastly what are some decent compliance workshops in perth

http://www.prestigemotorsport.com.au/modul...hp?StockID=4041

Edited by Jolinator

Well, I can see where you made your first mistake.

Anyway, you need to ask Geoff what compliance shops there are in WA, or look it up on the DOTARS site. From what I understand this needs to be sorted BEFORE you ship the car.

I have heard of this being done. It is not uncommon for shops to effectively sell compliance to each other. Some GT-R's in WA have been complied over east because of a shortage of availability over here. It is ok to do it this way, but there are some key questions you need to ask:

Who is the shop?

How much are they charging for compliance?

How are you going to arrange rego?

Who is paying for the freight across from Vic/NSW?

What about the non standard gear - ie how are you going to get that?

Good luck with it & make sure your broker looks after you.

Edited by djr81

nice car. it's a mark hocking car. and from the looks of it inspected at prime garage. I met the owner of prime garage earlier this year in tokyo and he is a lovely guy very helpful. I'd suggest you wont have any problems with it as it looks very tidy and mark only buys good cars. It's a shame you couldn't have got it directly from mark but not to worry, it's no biggie.

as djr81 suggested you will need to look at the DOTARS site to get an idea of who has SEVS compliance around australia.

djr81 by first mistake, do you mean going through prestige? i found them to be the best, geoff has always been extremly helpfull and went out of his way for many months for me when i wasnt even a customer, unlike j spec who didnt reply emails and when they do its so late the car has been sold, so im quite happy through i went through. however im extremly new to importing so if there is something im missing?

beer baron, when i saw the name mark hocking on the invoice it actually worried me as that name rang a bell , i swear i herd that name mentioned as a bad trader someware, maybe not, its good to hear that.

i have put a deposit on the car until the 20th, so i still have a bit of time up my sleave, unfortunatly i have to pay for transfer costs from nsw to w.a, when i spoke to geoff, he sayed the guys he uses will fit up their stock parts and refit stuff like the airpods etc after, he assured me none of it would go missing, he mentioned compliance was a fair wack cheaper in nsw, but i am not home so i dont have the figures infront of me, i will check when im home

thinking about it, i kinda want it to come through perth so i can be in control of everything, but a 4 month wait would kill me,

rego i was going to do in perth when it got here, i will speak to geoff a little further,

cheers for the tips fellas :yes:

Edited by Jolinator

i think djr81 was hinting that if you just bought the car from mark hocking it would have been $1000 cheaper as you are now paying a broker fee ($1K to geoff) and FOB charge (~150,000yen to Mark). but in the grand scheme of things it's no big deal. I think you may have confused Mark hocking, with Mark Schuman people have posted some things about the second mark in the past.

where does geoff suggest complying it in sydney?

Yeah, well forum rules preclude me from expressing a full opinion.

But specifically, in this instance, what I am saying is that the compliance workshop needs to be found BEFORE you buy a car.

What you now have to work out is the cost of transport ex East and compare this with shipping the car in a container (As opposed to on a car transport). You may find there is little in it.

I suggest getting on the phone to your broker & demanding from him a list of compliance workshops, their location, costs for compliance/transport & the timeframe for doing the work in a given manner. After all that is what you are paying him $1100 for.

No point having a dog & then doing all the barking yourself.

  • 4 weeks later...

Autoworx in Wangara do compliance for R32's. They also have some basic standard parts that you can use to get your car complied. Give them a ring and speak to Paul. Imports 101 also do compliancing for R32's as well I believe so speak to Danny there.

when mine was complied in nsw it would have been $81 cheaper to have it complied in perth that included road freighting fromnsw to perth via TNT but at that stage no one here had raws for r 32

Compliance does not have to be organised before you purchase the car. Do not know where you go that from :dry:

However if you talk to the compliance workshop once you have purchased it and set a date for import, they will organise import approval for you.

If it is going to take 4 months, the best thing you can do is enquire is to how long it would take if u had compliance done in the eastern states and for it to be delivered to you in WA. Then weigh up whether it is worth the extra cash.

4 months however is only about 1 month longer than normally how long it takes, so yeh...delays suck, but they have to be expected.

I think it is best to sort out your compliance shop before you buy the car. Strictly speaking, it is not mandatory, but it is by far the better practice. Otherwise you can get into stupid situations like the one shown above and end up incurring delays and possibly having to spend more than you think because of additional transport costs etc.

However, it has to be done before you ship it.

But in any case it is a good idea to have all your ducks in a row before starting to spend money.

I completely agree with DJR81, you really need to have all your homework done beforehand, so it leaves less to chance, and less to get ripped off.

My car was complianced in Melb and then i TNT'd it to Perth, a costly exercise.

I bought it 18 months ago and there werent too many 32 GTR's for sale in WA

Having said that, I later found that it would have been cheaper to get my complianced here in WA, ho hum.

But I'm interested in why you bought a 32 GTR to import ? These days there are so many for sale in WA and i think people are hurting trying to sell them.

There are a few bargains around.

All in all your car looks very clean and tidy, so good luck :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...