Jump to content
SAU Community

Recommended Posts

Hey guys, done some recent mods to my R32 Gts-t;

3 inch HKS cat bak,

Hybrid FMIC,

Greddy profec B 2 EBC,

new iridium plugs,

full synthetic oil + catch can.

(now runnin 10psi @ low boost, 13psi @ high)

I've had it all tuned initally and wasnt to thrilled :wave: so i sent it bak and had the plugs re-gapped which improved High end considerably,

Now im feeling a real flat spot at mid rang as she comes on to higher boost, then it just wants to rocket to 7000rpm.

At what point should i need to upgrade fuel pump and injectors? I would have thought standars would be sufficiant??

any help would be appreciated

Regards Damian

Link to comment
https://www.sau.com.au/forums/topic/126005-rb20-power-flat-spot/
Share on other sites

A new fuel pump fixed mine (exactly the same problem), take it to a mechanic, he should be able to do a fuel flow and pressure analysis on you (cost me $40). You will also want to replace the fuel filter. Tell me if you need help on packs, afm checking or any other suggested solutions for this problem, as ive just done it all to mine :dry:

Edited by r32 gts-turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...