Jump to content
SAU Community

Recommended Posts

You want to get rid of body roll, dont go looking for getting coilovers. These coilovers with high spring rates as give u nothing but the shittest ride around. If you want to get rid of body roll, go for upgrading your sway bars.

I highly recommend SydneyKid's group buy for Bilstein Shocks, Whiteline accesories, or at least speak to him bout it.

Link to comment
https://www.sau.com.au/forums/topic/126129-tein/#findComment-2331128
Share on other sites

Well I got a price of $2500 supplied and fitted, alined etc for the 'aussie' spec teins from Fulcrum. That was the works in terms of the suspension gear its self, no camber or castor kits.

SKs set up came in a fair bit cheaper. In my case anyway. That and I feel I have a better quality product.

Link to comment
https://www.sau.com.au/forums/topic/126129-tein/#findComment-2331748
Share on other sites

lookng 4 options any sugestionsn allredy have sway bars etc'

Well I got a price of $2500 supplied and fitted, alined etc for the 'aussie' spec teins from Fulcrum. That was the works in terms of the suspension gear its self, no camber or castor kits.

SKs set up came in a fair bit cheaper. In my case anyway. That and I feel I have a better quality product.

Link to comment
https://www.sau.com.au/forums/topic/126129-tein/#findComment-2331844
Share on other sites

lookng 4 options any sugestionsn allredy have sway bars etc'

I did too. So sway bars werent included in that price. I wanted a proper fix as I had rebuilt jap coilovers to aussie road spec, and 3 of those failed. I didnt really want to replace the stuff again.

So after my own research and a long conversation (and a few shorter ones :P ) with SK I decided that for what I wanted the bilstiens were the best and most cost effective (not cheapest, but the service life would seem longer than jap coilovers) option. Reason for getting them through SK over anyone else is he is and will be the cheapest, unless you get lucky and find someone who has ordered the wrong shocks and is trying to flog them off cheap.

Id talk to SK, read the shock 101 thats sticked in this forum, ring say fulcrum and talk to them (they are a tein dealer and do have a 2 year warrenty or something). Then make your own then educated decision on which way to go.

Link to comment
https://www.sau.com.au/forums/topic/126129-tein/#findComment-2331977
Share on other sites

Well my Bilsteians after about 5 or 6 years of faithful service are coming out. Last inpection about 24 months ago had them in perfect health.

I cant makeup my mind on another shock, they are all too much money to find im not happy with the buy, so in the next 4-6 weeks they will be coming out and be stripped down and rebuilt.

New higher rate springs and converted to fully height adjustable. Will report back on what the shock condition was before rebuild, im guessing they will are fine...

Still works out cheaper then even the basic bottom of the range adjustable coil overs available on the market.

Though if someone wants to save me the agro and sell me their new still in box HKS Hyper Max II for cheap then i will buy them ;)

Link to comment
https://www.sau.com.au/forums/topic/126129-tein/#findComment-2332060
Share on other sites

Base adjustment? I take it as meaning that you can adjust the ride height of the car with an adjustable lwoer spring seat, the threaded bit.

At the end of the days, its all a matter of personal preference and what you do with your car. Some swear bv a certain brand, others dont care. Im more the dont care what brand it is...im just sensitive to the fact that overall im pretty happy with the Whiteline kit i h ave and dont want to spend thousands on something that wont make me go any quicker over 1 lap at the track...plus i seriously doubt that i would be able to actually go quicker because of better suspension.

Odds are what feels quicker to me is slower ;) So, thats me. You need to think about what you want from your car and what expense you are willing to pay.

The fact that your looking for a really good price on Teins suggests that you are motivated by budget like me, so best advice is go for a drive in a few other GTSts and see what you like the feel of.

If you just want a nicer handling car with good ride, then you cannot go past Whiteline Swaybars witha good alignment. Thats about the only thing i know for sure :D

Link to comment
https://www.sau.com.au/forums/topic/126129-tein/#findComment-2332343
Share on other sites

budget important but no be all end all

as always u dont want to pay too much for something when u can get it cheeper

i dont want to be looking at new suspension again 4 a long time so i want to get it right got a few mates with tein flex in there car and they sware by it so realy need to find some people in qld with some setups to compare

Link to comment
https://www.sau.com.au/forums/topic/126129-tein/#findComment-2332505
Share on other sites

ive had the tein h/a's for almost 4 years, they are firm ( roughly middle setting, so they can go alot harder or softer) some ppl find them too hard, some dont mind, im personally used to it, and i prefer hard suspension it makes me feel more in control of the car, i get 0 bodyroll and i have stock sway bars etc, just comes down to what u like, the flex or super street might be a better option which would have gotten but they werent out when i got mine and a bonus u can have the edfc hooked up to them as well, as with the H/A's u cant

ben...

Link to comment
https://www.sau.com.au/forums/topic/126129-tein/#findComment-2351405
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...