Jump to content
SAU Community

Recommended Posts

yeah silver I'd go as far to say the oil cooler is not working properly at all.

In the GTR running around 260kw atw my oil temp sits between 80 and 90 all the time, and certainly doesn't go up just cruising on the free way. The figures you have sound about normal for a car without any oil cooler.

You really need to cut out that splash gauge and preferably fit a louvered extraction vent or at least do a swiss cheese job on it. then build a little duct around it running up to the opening in your front bar. your welcome to have a look at mine if you need some inspiration.

yeah well the way it's mounted now is practically in a sealed box so it's doing fark all cooling. except a small radiation effect. you may as well have installed it in the boot, or your neighbours car for all the cooling benefit you're getting! lol

Just for reference the R33 gtst in the driveway sits at 79 degrees all day everyday regardless of stop/start or highway driving. It moves around 2-3 degrees when you give it some for a while...

Is the rb20 different?

Would of thought it'd be a good idea to get a thermostat and set the oil temp abit lower (say mid to low 70s) will make the engine run cooler and make abit more power too (or so i read in speed lol)

Sorry my bad, thats water temp that sits just under 80 degrees not oil temp, oil temp is slightly higher as ud expect, sorry i got confused for a sec hehe

If you don't agree with running oil slightly cooler being an advantage thats your opinion, the magazine i read obviously feels differently, personally i don't care either way lol!

Edited by jazza08

is there an actual benefit to having the oil at 50 degrees over 80 degrees ?? for example ..

if the cooler keeps it at 80 all the time, would you see any benefit with performance or longevity if it was at 50 degrees instead.

I think 50 might be abit low, but by keeping core engine temps lower the parts operate at a lower temp and will last longer and perform better. Ill have a look later but what i saw was something along those lines! It wasnt a MAJOR drop in oil temp like 30 degrees like you mentioned tho dude, more like low-mid 70s i think!

Im sure someone with abit more knowledge could input on this if they had a read...

What I mean guys, is that going below a certian temperature point where there is no real advantage. Oil works best between 70-100C. Going too cool and the additives are not functioning in their optimum temp range and the oil viscosity is getting too thick.

I'm not saying oil coolers are no good, thats misinterpreting. It means using oil coolers to keep oil in this range for heavily modified cars. It is good to keep the oil temp as close to the coolant temp as possible. If there is major differential, then an oil cooler is needed.

And jazza08, what magazine/article are u referring to? If running cold oil was the bomb, then we might aswell run around with 30C thermostats too.Chasing more hp outta your motor by running cold oil certianly is the wrong way to go about things! If that were the case we'd put our cars on the dyno cold!

Put your car on the dyno cold and expect things to blow up as they aren't at operating temp... ill go have a look abit later through some of the speed/hpi n any other mags i have to see where i read it coz i cant remember off the top of my head!

30 degree thermo's would obvioulsy create problems with the parts running too cold which they aren't suited for, however a few degree's lower i read wasnt such a bad thing. Who knows ill report back some findings i could be way off lol

Ok this is what i was talking about, taken from Perth street mag, even though its a v8 the principles of a cooler motor/parts should apply to all engines.

"With new themostat in place, the engine typically runs 10 degrees cooler but still remains within the acceptable bounds for the standard PCM (above 70 degrees). The standard themo opens at 93deg and is fully open at 105deg. The new thermo starts to open at 80deg and is fully open by 87deg. As a result the enginer runs a higher ignition advance, normally between 5 to 7deg more than normal. At cruise rpm this additional timing is noticeable in the seat of the pants, giving snappier accel and throttle response. With the thermo fitted to a BA GT the peak power result at the wheels rose 3kW but the real story lies in the torque curve which was reaised across the majority of the rev range, with a peak gain of 100N at the wheels"

This is where i read this and got the idea from! Nismo offer a lower temp thermostat for skylines, obviously Nissan must think that its some sort of gain?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...