Jump to content
SAU Community

Recommended Posts

Although yes it is cheap power i do agree, however as stated before it is far more dangerous to the environment and your bank account if you get caught. Do you know what gasses are emmited from your exhaust when you have no cat converter? NOx and COx (Nitrogen Oxides and Carbon Oxides) are the main ones, some of which are extremely toxic. A cat coverter chages some of these deadly gases into safer less toxic gasses.

Carbon monoxide is an example of this.

IMO Dont do it, its not worth it really when you thing about it.

Beer Baron: I've heard of cars brought over from NZ that don't have the cat on them, in fact I know someone thats had their S2 imported from NZ and it had no cat on it, and he had to pay for a new cat to get a safety certificate and he wasn't made aware at the time of puchase that it didn't have one. I was just wondering why/if its legal over there or is it just some loophole.

Just a Q.

Cheers :D

ah well that is different. in most countries (australia included) cat conversters only became mandatory after a certain year ( i think in aus it's 1986). so that year ruling can differ in other countries (for example in the UK I think it's 1992 or something).

U cant be serious?

I hope he really is!

Besides the first person who will suffer the most from those toxic gasses will be the moronic driver himself... I get shit loads of exhaust gas from my car every time the turbo timer is running... I cant imagine how much shit Id breath if my cat converter wasnt there... :D

Although yes it is cheap power i do agree, however as stated before it is far more dangerous to the environment and your bank account if you get caught. Do you know what gasses are emmited from your exhaust when you have no cat converter? NOx and COx (Nitrogen Oxides and Carbon Oxides) are the main ones, some of which are extremely toxic. A cat coverter chages some of these deadly gases into safer less toxic gasses.

Carbon monoxide is an example of this.

IMO Dont do it, its not worth it really when you thing about it.

thanks for all the replies, was intending on putting a high flow cat anyway incase emissions were to be tested by my friends (police). Wasnt sure what cat actually did or what fines were. However you would be surprised how many people just ram a steel tube thru their cat to free flow it.

I hope he really is!

Besides the first person who will suffer the most from those toxic gasses will be the moronic driver himself... I get shit loads of exhaust gas from my car every time the turbo timer is running... I cant imagine how much shit Id breath if my cat converter wasnt there... :D

What about cars from pre mid eighties that dont have cat converters. my bro has a killer xy gt that ran on av gas b4 laws changed, he hasnt dropped dead from toxic fumes.

What about cars from pre mid eighties that dont have cat converters. my bro has a killer xy gt that ran on av gas b4 laws changed, he hasnt dropped dead from toxic fumes.

also if you ran a hose from your exhaust into your car window you would be dead within a minute, cant get anymore toxic than that with or without your cat.

What the cat converter does is uses a catalyst such as platnium or vanadium i think to convert the main toxic gasses (CO-Carbon Monoxide and NOx-Nitrogen Oxides and Hydrocarbons) into less harmful gasses. These are all pollutants which are both toxic and cause pollution known as smog. Even the hydrocarbons can be broken down by the sun into Ozone (O3) which attacks rubber, and cuases respiratory problems at ground level.

These less harmful gasses are CO2-Carbon Dioxide and Nitrogen gas (N2) plus some additional oxygen and some water vapour. All of which are far less detrimentral to the environment or anyone standing around yor exhuast.

So if you were to stand at your exhuast for an extended period of time with no cat, you would eventually just feel dizzy and or faint from reduced oxygen in your blood.

In the end, highflow cat is the way to go IMO.

What about cars from pre mid eighties that dont have cat converters. my bro has a killer xy gt that ran on av gas b4 laws changed, he hasnt dropped dead from toxic fumes.

How long have petrol cars existed? Notice how much damage in such short period of time cars have caused to the environment (ozone lair, global warming etc)...

People do something then they think why it caused problems...

Do I even need to mention atomic radiation and idiots watching it a few KMs away?

Edited by Sir-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...