Jump to content
SAU Community

Recommended Posts

just now i took mi skyline out for a drive, there was a red xr6 at the lights near mindarie custom exhaust next to me so i hav it some heavy gas, wen i floored it as soon as the car started to hit 4500 rpm it started to cut out and make a series of back fire noise and lost power so i slowed down and then tried it again and it did the same thing? does any one know wat it could b?

Link to comment
https://www.sau.com.au/forums/topic/126305-i-think-theres-big-problems/
Share on other sites

dunno havnt checked aye, just started it up again then and it doesnt hav a smooth idleing noise to it, it runs for about 10 seconds then it will sound deep for a second then go back up to a higher pitched idleing sound, if that makes sense haha!

hey heres an idea.... coil packs :wave:

Just have a look to see if any of them are unplugged. They will be under that cover in the middle of the engine. The one that says "nissan 2500" if one of them is unplugged it will do that.

Just grab a set of alan keys and pull the cover off to have a squizz. Dont worry its just cosmetic really, you wont break anything.

hmmm guys... i think im having the same problem as well but might be a little different.. when i go on low boost at 0.5bar the car runs kinda smooth but when i switch on to high boost at 0.7bar the whole car seems to be missfiring hell alot like after 5000rpm's in 2nd gear and 3rd gear after 4000rpm's and so on.. it just keeps missfiring non stop... i heard some ppl say that i may need a safc as it may be running too rich coz i can see blacksmoke coming out from exhaust when i floor it in high boost and missfires. some say the spark plugs may not be gapped properly.. some say my fuel pump... any of u guys experienced this problem before?

Cheers

[bernard]

hmmm guys... i think im having the same problem as well but might be a little different.. when i go on low boost at 0.5bar the car runs kinda smooth but when i switch on to high boost at 0.7bar the whole car seems to be missfiring hell alot like after 5000rpm's in 2nd gear and 3rd gear after 4000rpm's and so on.. it just keeps missfiring non stop... i heard some ppl say that i may need a safc as it may be running too rich coz i can see blacksmoke coming out from exhaust when i floor it in high boost and missfires. some say the spark plugs may not be gapped properly.. some say my fuel pump... any of u guys experienced this problem before?

Cheers

[bernard]

coilpacks.. replace them with splitfire ones off nengun or perfectrun.com.. the standard nissan ones are like a grand to buy but these aftermarket better ones cost around 600 delivered get them i garentee will fix ur problems

Here's a list of issues that cause tis common problem.

Are the plugs in properly? - reseat.

Are the plugs the correct heat range? - std is 5. 6 and 7 should also be ok.

Are the plugs gapped to 0.8mm - std plugs are 1.1mm, regapped to 0.8mm makes a sturdier spark.

Are your coil packs old and fcuked? - epoxy old ones or get new ones.

It could be running rich. - ECU adds more fuel than fuel needed running more boost. This can cause misfire. - Need aftermarket ECU or piggy back cumputer and tune.

It could be running lean. -fuel pump not supplying enough fuel to the engine, causing it to ping and the ecu hears this by microphones and cuts/retards the ignition. - need a fuel pump, common in early 33's

Most probably your issue is a combo of running rich, which skylines do in the cold, and dodgy colial pack and/or spark plugs.

The good news is that your engine is most probably OK.

hmmm okie.. so a SAFC is not needed eh? cool.. i will go check the spark plugs first.. i will go back to the shop and ask them to regap it for me as i think if they did it wrongly they wont charge me :D u may think im a cheapskate but im only a student and only workin part time and dont even have a fmic :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...