Jump to content
SAU Community

Recommended Posts

As above.

Boost is just as important, depends how the autronic works, if it see's detonation does it pull timing?

An overboost could spark problems

Road car, oil temp i wouldnt worry about.

Boost/Water Temp/Oil Pressue

Track - boost/water temp/pil press/oil temp

I would have 4... well... i will be going for 3 of those as the PFC will do water temp for me

one guy on SAU is rebuilding his engine after the countersunk screws in the back of the oil pump came loose and slowly got worse til it failed completely... so this was progressive.

i dont trust any of the std guages other than speed and tacho, and i know they are wrong the further up the scale you go..

one guy on SAU is rebuilding his engine after the countersunk screws in the back of the oil pump came loose and slowly got worse til it failed completely... so this was progressive.

i dont trust any of the std guages other than speed and tacho, and i know they are wrong the further up the scale you go..

Any other circumstances where the oil pressure guage has been useful?

I really feel that the guage is a total waste of time, space and weight!

it depends where you put them

in the centre console i think would be useless as you cant easily see them while driving.

i would go for, if you must have guages

exhaust temp

get a wideband sensor and tune tune tune tune the pants off it

Any other circumstances where the oil pressure guage has been useful?

I really feel that the guage is a total waste of time, space and weight!

fair enough

i could handle the 100grams for a little peace of mind that i can see how much pressure the oils has is all...

Im in the same boat as you as in I have never had a liking to a plethora of gauges.

But as power goes up the need seems to be justified.

You have an Autronic, so you also have the option of getting a digital dash that will show all vitals and in most cases data log as well. They cost a bit for a decent unit but end up the same if not cheaper than buying individual quality gauges.

Any other circumstances where the oil pressure guage has been useful?

I really feel that the guage is a total waste of time, space and weight!

split oil line on a turbo... or any other leak related.

Even under filling from a mechanic/yourself and not checking the dipstick correctly. Small mistakes are possible.

All would cause low/lowering oil pressure etc.

If the oil was leaking out say onto the road via a small split you wouldnt intially notice without the gauge.

If you did have the gauge, you'd notice at a very quick glace that it was below normal.

So rather than getting so low that the oil-low light comes on. You actually have a much better chance at spotting it. Rather than giving it some high RPM and finding out there isnt enough to go around

doesnt the skyline already have an oil pressure guage and a boost gauge? So why would anyone need an aftermarket gauge?

because they are getting old enough to be horribly inaccurate.

std boost guage goes to 1 Bar max.. im running 18psi, and since i started running that, the std boost guage just doesn't work anymore, for boost or for vacuum (by not work it sticks and reads wrong, and at full boost it hard against the top of the guage)

coz the standard ones are shyt and to me inaccurate...

FATGTS-R- u say digital dash? i have the program for my laptop but its not very convenient to have my laptop hooked up every time i wanna drive the car, ive checked the autronic website, an i can't find any info on the digital dash, or anythin like it for an SM4

ben...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My apologies. I forgot we were talking about weird beard M series stuff. Had been talking elsewhere with someone about an R33 with similar subject and got confused.
    • Nope, I don't like the look of ND RF, or any ND really, I don't like their faces or arses, why, because of their "modern" lines, the NC, whilst "modernish" has a more rounded shape that I like Well, that's how my overly judgemental eyes see it anyway  
    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
    • I definitely know the first rule here, look first, ask second. I've seen many people get roasted 😂 I found a few diagrams for the RB, but I'm yet to come across one for the VQ. From what I have read, the pump gets the +12v along with the FPCM, and it's the negative wire that gets passed through the resistor to regulate the voltage. So I assume I can just ground the negative wire at the pump to eliminate the FPCM control. But I really wanted to see the VQ circuit diagram first to make sure I understood it correctly. Once the new pump is in I'll do some testing to see how it behaves, and in the meantime, I'll keep looking for a wiring diagram. Thanks for your help mate, your time is greatly appreciated.    
    • Maybe? I have the Supercheap ToolPro low thingo. It has a somewhat smaller diameter lifting "bowl" than you would expect on a workshop grade trolley jack, and a split rubber pad to suit that diameter. It clears the "N1" style skirts I have. Probably wouldn't if the jack's bowl and a suitably larger rubber block were in use. Having said that though.....you only need the rubber block to exist on the inner side of the pinchweld, so could carve away any rubber that fouled the skirt, leaving some there for "insurance" </simples>
×
×
  • Create New...