Jump to content
SAU Community

Recommended Posts

  • Replies 219
  • Created
  • Last Reply

Top Posters In This Topic

Just a question - but how much are people paying? Aren't we waiting to get the 20+ price? Or are you going to refund the difference?

just not sure yet whats happening...

how come half of the rb25det ppl are only getting the exhaust

i saw someone post that, the exhaust is only needed.

Is there a reason?

r33 series 1

I have 306rwhp, soon to go to 350rwhp

I have standard cams, standard engine

just pfc, fuel pump, hiflow turbo, fmic,avcr, exhaust

set on 12psi will be goin to 18psi, with install of 555cc injectors, z32afm and fuel reg

would this be worth while thing to do at the same time?

Just a question - but how much are people paying? Aren't we waiting to get the 20+ price? Or are you going to refund the difference?

just not sure yet whats happening...

There are alot of people just getting 1 cam gear, when people have made there deposits ill put up everyones names, then i can find out the number of people we have. if we get the 20 people or 40pcs

i will give the refund needed to all people that paid extra.

This is the list we have currently.

1) R33KID *IN PAID FOR A PAIR

2) 2GU UP *IN

3) R33 STAGEA *IN

4) xRHETTx *KEEN

5) AWDMAT *KEEN

6) JIMx *KEEN

7) Siddr20 *KEEN PAID FOR 1 CAM GEAR

8) 180 mph *IN PAID FOR I PAIR

9)Tangles *IN PAID FOR 1 CAM GEAR

10)Kozeyekan *IN

11)stolen *IN PAID FOR 1 PAIR.

12)Woodys *IN PAID FOR 1 CAM GEAR

13)upik14me *IN

14)beastien *IN

15)Munna1 *IN PAID FOR 1 CAM GEAR

16)kjb_r33 *IN PAID FOR PAIR

17)bilbo117*IN PAID FOR 1 CAM GEAR.

18)johnbela*IN

19)cln *IN

20)prelude_1976 *IN

Edited by r33kid
how come half of the rb25det ppl are only getting the exhaust

i saw someone post that, the exhaust is only needed.

Is there a reason?

r33 series 1

I have 306rwhp, soon to go to 350rwhp

I have standard cams, standard engine

just pfc, fuel pump, hiflow turbo, fmic,avcr, exhaust

set on 12psi will be goin to 18psi, with install of 555cc injectors, z32afm and fuel reg

would this be worth while thing to do at the same time?

I was wondering the same thing thats why the delay on my payment r33kid. Need to now if only exhaust side is needed for R33 series 1 or can get better results with both of them in. With stock cams shafts.

I think the reason you only fit the exhaust cam gear is because the inlet is variable through 20 degrees any way, Moves from 0 degrees to 20 advanced at 1200 rpm underload and back to 0 at 5000 rpm.

I think the reason you only fit the exhaust cam gear is because the inlet is variable through 20 degrees any way, Moves from 0 degrees to 20 advanced at 1200 rpm underload and back to 0 at 5000 rpm.

Ok so your saying that if you have the RB25det then only exhaust side is really required.

Thnx.

Hey,

I guess I'm number 20, yipee $140 for all? :)

Ineed 1 pair for RB26

Would it be possible to pick up, I;m from Syd, willing to travel?

Thanks

how come half of the rb25det ppl are only getting the exhaust

i saw someone post that, the exhaust is only needed.

Is there a reason?

r33 series 1

I have 306rwhp, soon to go to 350rwhp

I have standard cams, standard engine

just pfc, fuel pump, hiflow turbo, fmic,avcr, exhaust

set on 12psi will be goin to 18psi, with install of 555cc injectors, z32afm and fuel reg

would this be worth while thing to do at the same time?

Will be worth while for the cost but as you obviously have a upgraded turbo a set of tomei poncams would give you better gains. but this would be a lot more expensive than a cam gear.

cheers

These people on this list please advise what is happening i have sent you all PM's with no reply.

2) 2GU UP *IN

3) R33 STAGEA *IN

4) xRHETTx *KEEN

5) AWDMAT *KEEN

10)Kozeyekan *IN

13)upik14me *IN

18)johnbela*IN

19)cln *IN

20)prelude_1976 *IN

21)Tragic *IN

Edited by r33kid

I'm still in mate, payment will be in before the close of the GB (10th of August), and probably a lot sooner.

If you need it sooner let us know.

Rhett

I'm still in mate, payment will be in before the close of the GB (10th of August), and probably a lot sooner.

If you need it sooner let us know.

Rhett

We would like to get all interested to pay ASAP(this way we know we have the numbers) also if there isnt any more interest we can bring the closing date forward.

Edited by r33kid
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...