Jump to content
SAU Community

Recommended Posts

  • Replies 219
  • Created
  • Last Reply

Top Posters In This Topic

Just a question - but how much are people paying? Aren't we waiting to get the 20+ price? Or are you going to refund the difference?

just not sure yet whats happening...

how come half of the rb25det ppl are only getting the exhaust

i saw someone post that, the exhaust is only needed.

Is there a reason?

r33 series 1

I have 306rwhp, soon to go to 350rwhp

I have standard cams, standard engine

just pfc, fuel pump, hiflow turbo, fmic,avcr, exhaust

set on 12psi will be goin to 18psi, with install of 555cc injectors, z32afm and fuel reg

would this be worth while thing to do at the same time?

Just a question - but how much are people paying? Aren't we waiting to get the 20+ price? Or are you going to refund the difference?

just not sure yet whats happening...

There are alot of people just getting 1 cam gear, when people have made there deposits ill put up everyones names, then i can find out the number of people we have. if we get the 20 people or 40pcs

i will give the refund needed to all people that paid extra.

This is the list we have currently.

1) R33KID *IN PAID FOR A PAIR

2) 2GU UP *IN

3) R33 STAGEA *IN

4) xRHETTx *KEEN

5) AWDMAT *KEEN

6) JIMx *KEEN

7) Siddr20 *KEEN PAID FOR 1 CAM GEAR

8) 180 mph *IN PAID FOR I PAIR

9)Tangles *IN PAID FOR 1 CAM GEAR

10)Kozeyekan *IN

11)stolen *IN PAID FOR 1 PAIR.

12)Woodys *IN PAID FOR 1 CAM GEAR

13)upik14me *IN

14)beastien *IN

15)Munna1 *IN PAID FOR 1 CAM GEAR

16)kjb_r33 *IN PAID FOR PAIR

17)bilbo117*IN PAID FOR 1 CAM GEAR.

18)johnbela*IN

19)cln *IN

20)prelude_1976 *IN

Edited by r33kid
how come half of the rb25det ppl are only getting the exhaust

i saw someone post that, the exhaust is only needed.

Is there a reason?

r33 series 1

I have 306rwhp, soon to go to 350rwhp

I have standard cams, standard engine

just pfc, fuel pump, hiflow turbo, fmic,avcr, exhaust

set on 12psi will be goin to 18psi, with install of 555cc injectors, z32afm and fuel reg

would this be worth while thing to do at the same time?

I was wondering the same thing thats why the delay on my payment r33kid. Need to now if only exhaust side is needed for R33 series 1 or can get better results with both of them in. With stock cams shafts.

I think the reason you only fit the exhaust cam gear is because the inlet is variable through 20 degrees any way, Moves from 0 degrees to 20 advanced at 1200 rpm underload and back to 0 at 5000 rpm.

I think the reason you only fit the exhaust cam gear is because the inlet is variable through 20 degrees any way, Moves from 0 degrees to 20 advanced at 1200 rpm underload and back to 0 at 5000 rpm.

Ok so your saying that if you have the RB25det then only exhaust side is really required.

Thnx.

Hey,

I guess I'm number 20, yipee $140 for all? :)

Ineed 1 pair for RB26

Would it be possible to pick up, I;m from Syd, willing to travel?

Thanks

how come half of the rb25det ppl are only getting the exhaust

i saw someone post that, the exhaust is only needed.

Is there a reason?

r33 series 1

I have 306rwhp, soon to go to 350rwhp

I have standard cams, standard engine

just pfc, fuel pump, hiflow turbo, fmic,avcr, exhaust

set on 12psi will be goin to 18psi, with install of 555cc injectors, z32afm and fuel reg

would this be worth while thing to do at the same time?

Will be worth while for the cost but as you obviously have a upgraded turbo a set of tomei poncams would give you better gains. but this would be a lot more expensive than a cam gear.

cheers

These people on this list please advise what is happening i have sent you all PM's with no reply.

2) 2GU UP *IN

3) R33 STAGEA *IN

4) xRHETTx *KEEN

5) AWDMAT *KEEN

10)Kozeyekan *IN

13)upik14me *IN

18)johnbela*IN

19)cln *IN

20)prelude_1976 *IN

21)Tragic *IN

Edited by r33kid

I'm still in mate, payment will be in before the close of the GB (10th of August), and probably a lot sooner.

If you need it sooner let us know.

Rhett

I'm still in mate, payment will be in before the close of the GB (10th of August), and probably a lot sooner.

If you need it sooner let us know.

Rhett

We would like to get all interested to pay ASAP(this way we know we have the numbers) also if there isnt any more interest we can bring the closing date forward.

Edited by r33kid
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...