Jump to content
SAU Community

Recommended Posts

Hey,

Got first service since owning a r33. I dont know what oil the previous owner had in it but my mechanic (who is my dads mate) put Mobil XHP 15w-40 in it. Before having this service my oil pressure guage was mainly around the 4 mark. When cold & warm. Now since the oil change the needle is all over the joint. First thing in the morning the needle jumps right up to the bar between 4 and 8 and then after about 5 mins of driving comes down to the 4 mark, also if i drive for prolonged periods now (25 mins+) the stupid bar drops way down to the mark between 4 and 0.

Is this oil rat shiz?

Am I doing any dmg with this crap in my sump? What are regular needle readings for cold and warm?

Cheers

Mako

Link to comment
https://www.sau.com.au/forums/topic/126592-standard-oil-pressure/
Share on other sites

this happened to me aswell and i am using motul 4100 full synthetic

My mate uses a MOTUL oil, i think it is called TurboCharge Light or something like that, not sure of its temp ratings but he reckons it is good shiz... but im not sure what his guage displays, i will have to ask him...

how long have you been using that oil for and has this only just started happening to you to?

When cold - oil pressure should be around 6..

When warm - @ 4,000 rpm should be around 4..

When warm - idle - should be around 2..

- Colder the oil.. the higher the oil pressure.. the harder you push the car.. the higher the oil pressure.. normal cruising - you should sit around 4 unless you come to an idle..

Oil pressure should vary.. it's normal.. if you don't know why - I suggest you read some sites on the web regarding cars or oil pressure

Edited by Links

ok kool thanx for the feedback guys, it is possible that it was doing it before i changed oils but didnt notice but im not totally sure, anyway i feel more comfortable now knowing it is normal as it does make sense i just didnt expect it to vary from 2 to 6. I will conduct more research on oil pressure and temp just for personal interest.

Thanks a lot everyone

When cold - oil pressure should be around 6..

When warm - @ 4,000 rpm should be around 4..

When warm - idle - should be around 2..

mine does exactly this.. i think it's just below 6 at idle and when i'm doing ~2500rpm it is just above 6. but the other readings are spot on.

yeah. mine when warming up is around4-6 when warm. it idles 2-4 when on highway just below 4 but come off the highway and idle its below the 2 line. but drive again and its fine. stop and idle again and it will either be 2 or below 3. ive had it once halfway between 0-2 bar. this is on my 32GTR. im told the guage is shit and has a shitty reaction. dnt go by it and only go by the redlight on ur cluster if the light is on off goes ur engine..

dnt go by it and only go by the redlight on ur cluster if the light is on off goes ur engine..

Lol.... Yeah hopefully i'll never have to read that light.

Mine is all over the place aswell. It start off at about 6 for a bit then drops to 4 then after a while goes in between 0 and 2 and then goes back up to 4 and then back down to almost 0. It's really annoying because i got no idea what it's really at. looks like another guage is the way to go.

Its happened to me right after my oil change as well (motul 8100 5w40) or maybe i just didnt notice it before.

Around 6 when cold, slowly goes down to 4, then when the car gets warm goes to about 2, then after that just flutters around 2~4. This is in an R34 Gt-T btw.

  • 4 weeks later...

Guys,

I've got an R33. I've just rebuilt the engine and it drives great but I had the same problem with my oil pressure guage all over the place but it wasn't the gauge, it's the oil pressure sender under the bonnet near your oil filter.. get that changed... it only cost me 50 for the replacement part from another car... cheap fix.

in addition to the above, can anyone help me out regarding the method of changing the sender on an R33?

I have the sender and can see where the plug goes into it, just need to know how to go about changing it or whether it is best left to a mechanic. don't want oil to be spilling out all over the place if i remove it.

this is a requirement of a RWC and i kinda need this sorted this afternoon!

any help hugely appreciated.

Edited by thommo
  • 2 weeks later...

Your oil pressure should fluctuate, it's not going to stay @ the one level constantly, as you rev the engine higher and the oil warms ujp the pressure will either build up or decrease...

As long as it doens't drop below 2 too often, and doesn't go over 7ish.. you should be fine..

If the oil pressure light comes on, your in serious trouble, so either get an aftermarket gauge, or just check to see if yours is working..

Makes sense what those have been saying about the fluctuation of the gauge. Mine does exactly that. Starting off slightly higher then dropping slightly to around 4 when warmed up and cruising and down to 2-3 when at idle. I'm using Motul Turbolight 4100 as many others are. Considering for normal suburban driving this fluctuation is normal and fine, in fact it would probably be more of a problem if this wasn't the case!

Also keep in mind other cars don't have oil pressure gauges so while oil pressure is important, especially for a turbocharged car, it isn't the be all and end all. Hell, my bf's car didn't even come with a tacho!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...