Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Sign in is at the showgrounds Ed, as per the flyer. The Concourse will be there too if it's bucketing down with rain, but I doubt it. I am so with John about being pissed about this. 1 Week to the nats, and the website is down. Not a happy camper.

Link to comment
https://www.sau.com.au/forums/topic/126855-r31-forum/#findComment-2342864
Share on other sites

The skylinenationals website has some conflicting info on the home page:

The event is being held over the whole weekend, so book your holidays now, and be there. Registration is on Friday the 28th July, at the Shepparton Town Hall. Each model skyline will be covered, but it is an event in recognition of the 20th Anniversary of the only Aussie Skyline ever made, so that vehicle will be the premier attraction. We will have Skylines from the first Prince GT's to the current model R34.

Apart from all the pikers it should be a ripper, well done for organising it!

By the way did I see a keyboard data services sticker on the side of a Z in a shannons commercial?

Edited by EDS33T
Link to comment
https://www.sau.com.au/forums/topic/126855-r31-forum/#findComment-2342890
Share on other sites

By the way did I see a keyboard data services sticker on the side of a Z in a shannons commercial?

Yes you did, I can't believe the amount of people that have seen the Keyboard Data Sticker on that car. hehe. Excellent exposure for the business.

Link to comment
https://www.sau.com.au/forums/topic/126855-r31-forum/#findComment-2343129
Share on other sites

Eh.... surely people can go x number of days without one of countless forums to pillage & plunder :wave:

Would be fine Bluprint, if it wasn't so close to the nationals. Well it wouldn't be fine, but I wouldn't be as upset as I am at the moment. :wave:

Link to comment
https://www.sau.com.au/forums/topic/126855-r31-forum/#findComment-2343668
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...