Jump to content
SAU Community

Recommended Posts

bud - i have put in castrol anti-freeze mixed at 1part to 3 with water. When i take it on monday, im gonna get wayne to put the same in - cos it has to be flushed before the welsh plugs are changed.

Go for the best ones, cos as I found out, the wrong coolant (or lack off) can totally mess up your engine (im sure the idiot who owned the car in japan didnt take care of it as well as he/she shoudl have)

Link to comment
https://www.sau.com.au/forums/topic/126877-coolant/#findComment-2344264
Share on other sites

Cheers but thats like telling me a car needs an oil change every now and then... :)

Any specific number of KMs it must travel?

Every 2 years or 40,000 k's, if you use 33% glycol, if you use 50% , 3 years 60,000 km. Dont use more than 70%. Its best to use ready mixed, otherwise use de-mineralised water to mix it with .

Never use the cheap coolant ( it has about 5% glycol ) .

Link to comment
https://www.sau.com.au/forums/topic/126877-coolant/#findComment-2345089
Share on other sites

Another cool trick if you are not sure if you have the correct type or not enough coolant consentrate in your system is to put your multimeter onto amps, Positive in the COLD coolant (radiator cap) and negative to earth! Under 200 milliamps is OK and anything over 200 milliamps most likely means you have some electrolicess going on = bad

Two metals (cast block, alloy head) together with water have a chemical reaction causing an electric charge which means your inhibitors (glycol) aren't working properly with the compositions of the metals which causes rust and corrosion - only a general rule

Make sure when you flush the system - the thermostat is out and you flush the heater core as well

My coolant (water really) came out Brown when i first did it after importation

Edited by ellie
Link to comment
https://www.sau.com.au/forums/topic/126877-coolant/#findComment-2359507
Share on other sites

Sorry that the images are stuffed :O I don't know whether to fix them (again) because Prank has said they would fix them forum wide.

Thats cool, I remembered seeing it when it had pictures and I couldnt make sense of it :D Nothing to do with your pics, it was just the locations on the engine weren't recognisable, must have been in a helluva spot.

When I got home from work that day I also realised I had saved it to my Bookmarks :wub:

Link to comment
https://www.sau.com.au/forums/topic/126877-coolant/#findComment-2359684
Share on other sites

Another cool trick if you are not sure if you have the correct type or not enough coolant consentrate in your system is to put your multimeter onto amps, Positive in the COLD coolant (radiator cap) and negative to earth! Under 200 milliamps is OK and anything over 200 milliamps most likely means you have some electrolicess going on = bad

Two metals (cast block, alloy head) together with water have a chemical reaction causing an electric charge which means your inhibitors (glycol) aren't working properly with the compositions of the metals which causes rust and corrosion - only a general rule

Make sure when you flush the system - the thermostat is out and you flush the heater core as well

My coolant (water really) came out Brown when i first did it after importation

couldnt agree more. ive had my whole block heater core flushed 3 times so far and im still gettin chunks...

radiator is awesome though cos i had it rodded out at a radiator joint. it needed the top tank replaced too...

guys, check ur hoses as well. just so u know, theres 2 small coolant hoses that run around the back of the motor block between the firewall and the motor. an absolute prick to fix! i needed to have my gearbox removed to get to them. at least now i have some good pics of my clutch assembely.

maybe for a preventative measure, get all new hoses. just a suggestion

Link to comment
https://www.sau.com.au/forums/topic/126877-coolant/#findComment-2367673
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...