Jump to content
SAU Community

Recommended Posts

  • Replies 112
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

nah it sounds about right, the rev limit is at 7000 but what the ecu see and what the tacho see are two different things. it probably did reach 7800 at once stage, if you just keep bouncing and trying to make it, it will probably get there. i also get 3 different rev and speed settings from hand controller, rsm and stock tacho and speedo

I got about the same k's as you paul. I filled up in hoppers before i left on sat morning n got 200k's n used 1/4 of a tank when we got into shep, then had half a tank left after D4D and got home just under 1/4 left and had done 430k's so i would have gotten around the same as u easy.

For sure mate! It'll be great to see the old holden sideways. Just make sure it's got a locked diff and you'll enjoy yourself. Just do it for the fun of it, because your car will be the limiting factor. Give it a go!

haha, ya the car is gonna be a big factor in being gay, altho will be out there to have a ball, not to compete, its all about the fun, and socialising etc :)

its got a fkn tite assed mechanical lsd in er, recently rebuild n shit ... its nice :wave:

mite take a while, damn money holding me back !!!

Go the Lada!! :D

ladaburnoutrf6.jpg

So who photoshopped the smoke in there :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...