Jump to content
SAU Community

FS HKS GT3035 turbo with HKS....

rojoor
 Share

Recommended Posts

Al Grand Master

Al

Posted
Posted

Wouldn't this be a bit laggy for your purposes INASNT?

**Alan knocks on the back door, as he too might be interested, and asks for the answers to the following questions to be PM'ed to him asap.

-Is it a BB turbo?

-Any plumbing mods required to mount in a RB25det engine?

-Any dyno graphs for this set up? would like to see the response of the turbo

-How old is it (km and months)?

-where did it come from?

-why are you selling it?

-What are the specs?

Sorry about all the questions, but i am very interested and would like to do my research first.

Thanks for your time and help. Hope to hear from you soon.

**

:innocent: What!? I don't know what you talkin' about officer. :innocent:

judd Proficient

judd

Posted
Posted

All GT turbos are BB, it has a small exhaust housing and will come in around 3200-3500rpm on a Rb25 or 3500-4000 on a RB20. Will flow 450HP according to GCG. It was on a R32 GTS-T straight from japan. but will bolt up to a RB25. The guy is selling cause he sold his R32. I think its done approx 20,000km.

S4PLAY Contributor

S4PLAY

Posted
Posted

3035 is a discontinued turbo from 2001/2002 range or maybe 2000/2001 range if memory serves me correctly.

Spooling won't be a problem on a RB series engine, i've seen a couple on SR20's in 180's and they've been fine for 3500rpm boost.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...